Identification and extraction of cementation patterns in sand modified by MICP: New insights at the pore scale
PLOS ONE · 2024
DOI: 10.1371/journal.pone.0296437 ↗Kurz gefasst
Fachartikel in der Zeitschrift PLOS ONE, 2024. Verfasst von Baoquan Wang und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Geoscience and Technology, Southwest Petroleum University, Xindu, Chengdu, 610500, Sichuan, China. Hauptthemen laut MEDLINE: Sand, Calcium Carbonate. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 84 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Foundation of Sichuan Province, The Research Project of Sichuan Mineral Resources Research Center, The Opening Project of Tunnel and Underground Engineering Research Center of Jiangsu Province.
Abstract (Originalsprache)
Microbially induced calcium carbonate precipitation (MICP) is an environmentally friendly technology that improves soil permeability resistance through biocementation. In this study, 2D microscopic analysis and 3D volume reconstruction were performed on river sand after 24 cycles of bio-treatment based on stacked images and computed tomography (CT) scanning data, respectively, to extract biocementation patterns between particles. Based on the mutual validation findings of the two techniques, three patterns in the biocemented sand were identified as G-C-G, G-C, and G-G. Specifically, 2D microscopic analysis showed that G-C-G featured multi-particle encapsulation and bridging, with a pore filling ratio of 81.2%; G-C was characterized by locally coated particle layers, with a pore filling ratio of 19.7%; and the G-G was marked by sporadic filling of interparticle pores, with a pore filling ratio of 11.7%. G-C-G had the best cementation effect and permeability resistance (effective sealing rate of 68.5%), whereas G-C (effective sealing rate of 2.4%) had a relatively minor contribution to pore-filling and flow sealing. 3D volume reconstruction showed that G-C-G had the highest pore filling rate, followed by G-G and G-C. The average filling ratios of area and volume for G-C-G were 83.979% and 77.257%, respectively; for G-G 20.360% and 23.600%; and for G-C 11.545% and 11.250%. The analysis of the representative element volume (REV) was conducted, and the feasibility and reliability of the micro-scale pattern extraction results were confirmed to guide the analysis of macro-scale characteristics. The exploration of the effectiveness of cementation patterns in fluid sealing provides valuable insights into effective biocementation at the pore scale of porous media, which may inspire future research.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Substanzen
Autor:innen und Institutionen
- School of Geoscience and Technology, Southwest Petroleum University, Xindu, Chengdu, 610500, Sichuan, China.
ORCID-Profile: Liang Guo
Förderung
- Natural Science Foundation of Sichuan Province
- The Research Project of Sichuan Mineral Resources Research Center
- The Opening Project of Tunnel and Underground Engineering Research Center of Jiangsu Province
Zitieren
APA
Wang, B., Guo, L., Luo, X., Jiang, Y., Li, Q., & Xie, J. (2024). Identification and extraction of cementation patterns in sand modified by MICP: New insights at the pore scale. PLOS ONE. https://doi.org/10.1371/journal.pone.0296437
Vancouver
Wang B, Guo L, Luo X, Jiang Y, Li Q, Xie J. Identification and extraction of cementation patterns in sand modified by MICP: New insights at the pore scale. PLOS ONE. 2024. doi:10.1371/journal.pone.0296437
BibTeX
@article{Wang2024,
author = {Wang, Baoquan and Guo, Liang and Luo, Xuanli and Jiang, Yuhong and Li, Quanwei and Xie, Jiaheng},
title = {Identification and extraction of cementation patterns in sand modified by MICP: New insights at the pore scale},
journal = {PLOS ONE},
year = {2024},
doi = {10.1371/journal.pone.0296437}
}
EUVIMED