A systematic review of passing fit testing of the masks and respirators used during the COVID-19 pandemic: Part 1-quantitative fit test procedures
PLOS ONE · 2023
DOI: 10.1371/journal.pone.0293129 ↗Kurz gefasst
Systematische Übersicht in der Zeitschrift PLOS ONE, 2023. Verfasst von Anahita Fakherpour und 2 weiteren Autor:innen. Beteiligte Einrichtung: Student Research Committee, Department of Occupational Health and Safety Engineering, School of Health, Shiraz University of Medical Sciences, Shiraz…. Hauptthemen laut MEDLINE: COVID-19, Respiratory Protective Devices, Occupational Exposure. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 180 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Shiraz University of Medical Sciences.
Abstract (Originalsprache)
Background
During respiratory infection pandemics, masks and respirators are highly sought after, especially for frontline healthcare workers and patients carrying respiratory viruses. The objective of this study was to systematically review fit test pass rates and identify factors influencing the fitting characteristics.
Methods
Potentially relevant studies were identified using PubMed, Scopus, Web of Science, and Science Direct during the COVID-19 pandemic from February 5, 2020, to March 21, 2023. The search strategy using the following keywords was conducted: Quantitative Fit Test, Condensation Nuclei Counter, Controlled Negative Pressure, PortaCount, Sibata, Accufit, Fit, Seal, Mask, Respirator, Respiratory Protective Device, Respiratory Protective Equipment, Protective Device, Personal Protective Equipment, COVID-19, Coronavirus, and SARS-CoV-2. The quality of the included studies was also assessed using the Newcastle-Ottawa scale.
Results
A total of 137 articles met the eligibility criteria. Fifty articles had a quality score of less than 7 (good quality). A total of 21 studies had a fit test pass rate of less than 50%. 26 studies on disposable respirators and 11 studies on reusable respirators had an FF of less than 50 and less than 200, respectively. The most influential factors include respirator brand/model, style, gender, ethnicity, facial dimensions, facial hair, age, reuse, extensive movement, seal check, comfort and usability assessment, and training.
Conclusion
37.36% of the disposable respirator studies and 43% of the reusable respirator studies did not report fit test results. 67.86% of the disposable respirator studies had a fit test pass rate greater than 50%, and 35.84% of these studies had an FF greater than 100. Also, 85.71% of the reusable respirator studies had a fit test pass rate greater than 50%, and 52.77% of these studies had an FF greater than 1000. Overall, the fit test pass rate was relatively acceptable. Newly developed or modified respirators must undergo reliable testing to ensure the protection of HCWs. Subject and respirator characteristics should be considered when implementing fit testing protocols. An optimal fit test panel should be developed prior to respirator design, certification, procurement decisions, and selection procedures.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Autor:innen und Institutionen
- Student Research Committee, Department of Occupational Health and Safety Engineering, School of Health, Shiraz University of Medical Sciences, Shiraz, Iran.
- Department of Occupational Health and Safety Engineering, Research Center for Health Sciences, School of Health, Shiraz University of Medical Sciences, Shiraz, Iran.
- School of Mines: Minerals, Energy and Chemical Engineering, Faculty of Science and Engineering, Curtin University, Perth, Australia.
Förderung
- Shiraz University of Medical Sciences
Zitieren
APA
Fakherpour, A., Jahangiri, M., & Jansz, J. (2023). A systematic review of passing fit testing of the masks and respirators used during the COVID-19 pandemic: Part 1-quantitative fit test procedures. PLOS ONE. https://doi.org/10.1371/journal.pone.0293129
Vancouver
Fakherpour A, Jahangiri M, Jansz J. A systematic review of passing fit testing of the masks and respirators used during the COVID-19 pandemic: Part 1-quantitative fit test procedures. PLOS ONE. 2023. doi:10.1371/journal.pone.0293129
BibTeX
@article{Fakherpour2023,
author = {Fakherpour, Anahita and Jahangiri, Mehdi and Jansz, Janis},
title = {A systematic review of passing fit testing of the masks and respirators used during the COVID-19 pandemic: Part 1-quantitative fit test procedures},
journal = {PLOS ONE},
year = {2023},
doi = {10.1371/journal.pone.0293129}
}
EUVIMED