Implementing circularity measurements in industry 4.0-based manufacturing metrology using MQTT protocol and Open CV: A case study
PLOS ONE · 13.10.2023 · 18 (10) · e0292814
DOI: 10.1371/journal.pone.0292814 ↗Kurz gefasst
Studienprotokoll in der Zeitschrift PLOS ONE, online erschienen am 13.10.2023. Verfasst von Yazid Saif und 10 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Mechanical and Manufacturing Engineering, Universiti Tun Hussein Onn Malaysia, Batu Pahat, Malaysia. Hauptthemen laut MEDLINE: Commerce, Industry. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Higher Education (MOHE) through the Fundamental Research Grant Scheme.
Abstract (Originalsprache)
In the context of Industry 4.0, manufacturing metrology is crucial for inspecting and measuring machines. The Internet of Things (IoT) technology enables seamless communication between advanced industrial devices through local and cloud computing servers. This study investigates the use of the MQTT protocol to enhance the performance of circularity measurement data transmission between cloud servers and round-hole data sources through Open CV. Accurate inspection of circular characteristics, particularly roundness errors, is vital for lubricant distribution, assemblies, and rotational force innovation. Circularity measurement techniques employ algorithms like the minimal zone circle tolerance algorithm. Vision inspection systems, utilizing image processing techniques, can promptly and accurately detect quality concerns by analyzing the model’s surface through circular dimension analysis. This involves sending the model’s image to a computer, which employs techniques such as Hough Transform, Edge Detection, and Contour Analysis to identify circular features and extract relevant parameters. This method is utilized in the camera industry and component assembly. To assess the performance, a comparative experiment was conducted between the non-contact-based 3SMVI system and the contact-based CMM system widely used in various industries for roundness evaluation. The CMM technique is known for its high precision but is time-consuming. Experimental results indicated a variation of 5 to 9.6 micrometers between the two methods. It is suggested that using a high-resolution camera and appropriate lighting conditions can further enhance result precision.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Autor:innen und Institutionen
- Faculty of Mechanical and Manufacturing Engineering, Universiti Tun Hussein Onn Malaysia, Batu Pahat, Malaysia.
- Department of Industrial Engineering, College of Engineering Alfaisal University, Riyadh, Saudi Arabia.
- Center for Energy and Industrial Environment Studies, Universiti Tun Hussein Onn Malaysia, Batu Pahat, Malaysia.
- Department of Engineering Technology, Faculty of Technical and Vocational, Universiti Pendidkan Sultan Idris (UPSI), Tanjung Malim, Malaysia.
- School of Mechanical Engineering, Faculty of Engineering, Universiti Tecknologi Malaysia (UTM), Johor Bahru, Malaysia.
- Sana'a University, Sana'a, Yemen.
ORCID-Profile: Yazid Saif
Förderung
- Ministry of Higher Education (MOHE) through the Fundamental Research Grant Scheme
Zitieren
APA
Saif, Y., Yusof, Y., Rus, A. Z. M., Ghaleb, A. M., Mejjaouli, S., Al-Alimi, S., Didane, D. H., Latif, K., Abdul Kadir, A. Z., Alshalabi, H., & Sadeq, S. (2023). Implementing circularity measurements in industry 4.0-based manufacturing metrology using MQTT protocol and Open CV: A case study. PLOS ONE, 18(10), e0292814. https://doi.org/10.1371/journal.pone.0292814
Vancouver
Saif Y, Yusof Y, Rus AZM, Ghaleb AM, Mejjaouli S, Al-Alimi S, et al. Implementing circularity measurements in industry 4.0-based manufacturing metrology using MQTT protocol and Open CV: A case study. PLOS ONE. 2023;18(10):e0292814. doi:10.1371/journal.pone.0292814
BibTeX
@article{Saif2023,
author = {Saif, Yazid and Yusof, Yusri and Rus, Anika Zafiah M and Ghaleb, Atef M and Mejjaouli, Sobhi and Al-Alimi, Sami and Didane, Djamal Hissein and Latif, Kamran and Abdul Kadir, Aini Zuhra and Alshalabi, Hamood and Sadeq, Safwan},
title = {Implementing circularity measurements in industry 4.0-based manufacturing metrology using MQTT protocol and Open CV: A case study},
journal = {PLOS ONE},
year = {2023},
volume = {18},
number = {10},
pages = {e0292814},
doi = {10.1371/journal.pone.0292814}
}
EUVIMED