EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Research of the crankshaft high cycle bending fatigue experiment design method based on the modified unscented Kalman filtering algorithm and the SAFL approach

Shuyang Rui, Dongdong Jiang, Songsong Sun iD, Xiaolin Gong

PLOS ONE · 2023

DOI: 10.1371/journal.pone.0291135 ↗

Kurz gefasst

Fachartikel in der Zeitschrift PLOS ONE, 2023. Verfasst von Shuyang Rui und 3 weiteren Autor:innen. Beteiligte Einrichtung: College of Automobile and Traffic Engineering, Nanjing Forestry University, Nanjing, 210037, China. Hauptthemen laut MEDLINE: Research Design, Stress, Mechanical. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Youth Foundation of Jiangsu Province of China, Research Start-up Foundation of Nanjing Forestry University, Youth Foundation for Science, Technology and Innovation of Nanjing Forestry University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In modern engineering application, enough high cycle bending fatigue strength is the necessary factor to provide the basic safety security for the application of the crankshaft in automobile engines (both diesel and gasoline types). At present, this parameter is usually obtained through the standard bending fatigue experiment process, which is time consuming and expensive. In this paper, a new accelerated crankshaft bending fatigue experiment was proposed step by step. First the loading procedure was quickened through the prediction of the residual fatigue life based on the UKF (unscented Kalman filtering algorithm). Then the accuracy of the predictions was improved based on the modified sampling range and the theory of fracture mechanics. Finally the statistical analysis method of the fatigue limit load was performed based on the above predictions. The main conclusion of this paper is that the proposed accelerated bending fatigue experiment can save more than 30% of the bending fatigue experiment period and provide nearly the same fatigue limit load analysis result. In addition, compared with the particle filtering algorithm method, the modified UKF can provide much higher accuracy in predicting the residual bending fatigue life of the crankshaft, which makes this method more superior to be applied in actual engineering.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Research DesignStress, MechanicalHumansAlgorithmsAutomobilesEngineering

Autor:innen und Institutionen

  • College of Automobile and Traffic Engineering, Nanjing Forestry University, Nanjing, 210037, China.
  • Li Auto Vehicle Control Operation System, Hangzhou, 310000, China.

ORCID-Profile: Songsong Sun

Förderung

  • Natural Science Youth Foundation of Jiangsu Province of China
  • Research Start-up Foundation of Nanjing Forestry University
  • Youth Foundation for Science, Technology and Innovation of Nanjing Forestry University
  • Innovation and Entrepreneurship Training Program of Jiangsu province

Zitieren

APA

Rui, S., Jiang, D., Sun, S., & Gong, X. (2023). Research of the crankshaft high cycle bending fatigue experiment design method based on the modified unscented Kalman filtering algorithm and the SAFL approach. PLOS ONE. https://doi.org/10.1371/journal.pone.0291135

Vancouver

Rui S, Jiang D, Sun S, Gong X. Research of the crankshaft high cycle bending fatigue experiment design method based on the modified unscented Kalman filtering algorithm and the SAFL approach. PLOS ONE. 2023. doi:10.1371/journal.pone.0291135

BibTeX
@article{Rui2023,
  author = {Rui, Shuyang and Jiang, Dongdong and Sun, Songsong and Gong, Xiaolin},
  title = {Research of the crankshaft high cycle bending fatigue experiment design method based on the modified unscented Kalman filtering algorithm and the SAFL approach},
  journal = {PLOS ONE},
  year = {2023},
  doi = {10.1371/journal.pone.0291135}
}
Kostenlos starten →