EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Predicting spinal column profile from surface topography via 3D non-contact surface scanning

Lionel Rayward iD, Mark Pearcy iD, Maree Izatt iD, Daniel Green, Robert Labrom, Geoffrey Askin, J Paige Little iD

PLOS ONE · 2023

DOI: 10.1371/journal.pone.0282634 ↗

Kurz gefasst

Fachartikel in der Zeitschrift PLOS ONE, 2023. Verfasst von Lionel Rayward und 6 weiteren Autor:innen. Beteiligte Einrichtung: Biomechanics and Spine Research Group, School of Mechanical, Medical and Process Engineering, Queensland University of Technology, Brisbane City, Aus…. Hauptthemen laut MEDLINE: Scoliosis, Spinal Curvatures. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 19 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Introduction

3D Non-Contact surface scanning (3DSS) is used in both biomechanical and clinical studies to capture accurate 3D images of the human torso, and to better understand the shape and posture of the spine–both healthy and pathological. This study sought to determine the efficacy and accuracy of using 3DSS of the posterior torso, to determine the curvature of the spinal column in the lateral lying position.

Methods

A cohort of 50 healthy adults underwent 3DSS and Magnetic Resonance Imaging (MRI) to correlate the contours of the external spine surface with the internal spinal column. The correlation analysis was composed of two phases: (1) MRI vertebral points vs MRI external spine surface markers; and (2) MRI external spine surface markers vs 3DSS external spine surface markers. The first phase compared the profiles of fiducial markers (vitamin capsules) adhered to the skin surface over the spinous processes against the coordinates of the spinous processes–assessing the linear distance between the profiles, and similarity of curvature, in the sagittal and coronal planes. The second phase compared 3DSS external spine surface markers with the MRI external spine surface markers in both planes, with further qualitative assessment for postural changes.

Results

The distance between the MRI vertebral points and MRI external spine surface markers showed strong statistically significant correlation with BMI in both sagittal and coronal planes. Kolmogorov-Smirnov (KS) tests showed similar no significant difference in curvature, k, in almost all participants on both planes. In the second phase, the coronal 3DSS external spine surface profiles were statistically different to the MRI external spine surface markers in 44% of participants. Qualitative assessment showed postural changes between MRI and 3DSS measurements in these participants.

Conclusion

These study findings demonstrate the utility and accuracy of using anatomical landmarks overlaid on the spinous processes, to identify the position of the spinal bones using 3DSS. Using this method, it will be possible to predict the internal spinal curvature from surface topography, provided that the thickness of the overlaying subcutaneous adipose layer is considered, thus enabling postural analysis of spinal shape and curvature to be carried out in biomechanical and clinical studies without the need for radiographic imaging.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

ScoliosisSpinal CurvaturesAdultHumansSpineRadiographyTorso

Autor:innen und Institutionen

  • Biomechanics and Spine Research Group, School of Mechanical, Medical and Process Engineering, Queensland University of Technology, Brisbane City, Australia.
  • Sealy of Australia, Wacol, Australia.
  • Wesley Hospital, Auchenflower, Australia.
  • Mater Health Services, South Brisbane, Australia.

ORCID-Profile: Lionel Rayward, Mark Pearcy, Maree Izatt, J Paige Little

Zitieren

APA

Rayward, L., Pearcy, M., Izatt, M., Green, D., Labrom, R., Askin, G., & Little, J. P. (2023). Predicting spinal column profile from surface topography via 3D non-contact surface scanning. PLOS ONE. https://doi.org/10.1371/journal.pone.0282634

Vancouver

Rayward L, Pearcy M, Izatt M, Green D, Labrom R, Askin G, et al. Predicting spinal column profile from surface topography via 3D non-contact surface scanning. PLOS ONE. 2023. doi:10.1371/journal.pone.0282634

BibTeX
@article{Rayward2023,
  author = {Rayward, Lionel and Pearcy, Mark and Izatt, Maree and Green, Daniel and Labrom, Robert and Askin, Geoffrey and Little, J Paige},
  title = {Predicting spinal column profile from surface topography via 3D non-contact surface scanning},
  journal = {PLOS ONE},
  year = {2023},
  doi = {10.1371/journal.pone.0282634}
}
Kostenlos starten →