Design and fabrication method of the MEMS tunable metasurface thermal emitter with free-standing structures
Photonics Research · 01.01.2026 · 14 (1) · 297
DOI: 10.1364/prj.574681 ↗Kurz gefasst
Fachartikel in der Zeitschrift Photonics Research, online erschienen am 24.12.2025. Verfasst von Xiayu Wang und 11 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 47 Literaturangaben. Gefördert von: National Key Research and Development Program of China, National Natural Science Foundation of China.
Abstract (Originalsprache)
The emergence of tunable metasurfaces has paved the way for dynamic infrared manipulation and played a crucial role in advancing applications such as biochemical sensing and infrared imaging. In this paper, we present a micromachined tunable narrowband thermal emitter with a wide tuning range and a high quality factor by integrating microelectromechanical system (MEMS) reconfigurable metasurfaces with on-chip micro-heaters. Due to the resonance mode coupling of the metasurface and Fabry–Perot cavity, the emission peak can be modulated from 2–14 μm by continuously altering the thickness of the air gap. A versatile scheme for constructing a MEMS reconfigurable metasurface is proposed by combining free-standing all-metallic metasurfaces and silicon-based MEMS actuators, which can eliminate the intrinsic losses and multiple resonances in substrates, substantially increasing the spectral resolutions. A wafer-scaled MEMS microfabrication process is developed and implemented for the devices, indicating a potential for mass production. We further fabricate miniaturized tunable metasurface thermal emitters, realizing a tuning range covering the long wavelength infrared range and experimentally demonstrating the thermal emission capability as well. Our design provides a practical and effective solution for realizing a real-time thermal emission control with high performance and has a promising prospect in achieving highly integrated, low-cost dynamic infrared meta-devices.
Förderung
- National Key Research and Development Program of China
- National Natural Science Foundation of China
Zitieren
APA
Wang, X., Zhu, F., Feng, Q., Mei, Z., Xie, R., Jiang, Z., Liang, C., Wei, X., Zhang, G., Zhao, X., Fan, K., & You, Z. (2026). Design and fabrication method of the MEMS tunable metasurface thermal emitter with free-standing structures. Photonics Research, 14(1), 297. https://doi.org/10.1364/prj.574681
Vancouver
Wang X, Zhu F, Feng Q, Mei Z, Xie R, Jiang Z, et al. Design and fabrication method of the MEMS tunable metasurface thermal emitter with free-standing structures. Photonics Research. 2026;14(1):297. doi:10.1364/prj.574681
BibTeX
@article{Wang2026,
author = {Wang, Xiayu and Zhu, Fengjie and Feng, Qingsong and Mei, Ziqi and Xie, Rongbo and Jiang, Zhongjie and Liang, Chao and Wei, Xiangyang and Zhang, Gaofei and Zhao, Xiaoguang and Fan, Kebin and You, Zheng},
title = {Design and fabrication method of the MEMS tunable metasurface thermal emitter with free-standing structures},
journal = {Photonics Research},
year = {2026},
volume = {14},
number = {1},
pages = {297},
doi = {10.1364/prj.574681}
}
EUVIMED