EUVIMEDEUVIMED entdecken
Crossref

Hole–pillar coupled structure: a universal design model for two-dimensional gratings fabricated by dual-beam interference lithography

Ruipeng Wang, Yuqi Sun, Xinyu Wang, Wenhao Li, Zhaowu Liu, Yanxiu Jiang

Photonics Research · 01.01.2026 · 14 (1) · 22

DOI: 10.1364/prj.567789 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Photonics Research, online erschienen am 18.12.2025. Verfasst von Ruipeng Wang und 5 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 48 Literaturangaben. Gefördert von: Youth Innovation Promotion Association of the Chinese Academy of Sciences, Strategic Priority Research Program of the Chinese Academy of Sciences, National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Dual-beam interference lithography is a core technology for two-dimensional (2D) grating fabrication. However, significant morphological deviations occur between the fabricated structures and traditional theoretical models, causing diffraction efficiency prediction discrepancies. To address this issue, this paper proposes a hole–pillar coupled design model for 2D gratings fabricated via dual-beam interference lithography. By constructing the actual three-dimensional (3D) grating morphology, the proposed model describes the grating profile evolution during fabrication accurately. Using an inverse grating design method based on the Fourier modal method, a polarization-independent 2D grating structure with high diffraction efficiency was optimized for a 670 nm working wavelength. A 2D grating with a line density of 1200 gr/mm was fabricated using dual-beam interference lithography. Experimental results show that, when transverse electric/transverse magnetic-polarized light at 670 nm is perpendicularly incident, the diffraction efficiency of the (±1,0) and (0,±1) orders exceeds 20%, with a polarization imbalance of less than 3%. Atomic force microscopy characterization reveals a correlation coefficient of 0.988 between the actual and designed grating structures, verifying the proposed model’s accuracy. The model provides a precise description of the groove profile in 2D holographic gratings, expands the grating fabrication tolerance, and provides a theoretical foundation for the development of next-generation nanoscale-precision multi-degree-of-freedom measurement systems.

Förderung

  • Youth Innovation Promotion Association of the Chinese Academy of Sciences
  • Strategic Priority Research Program of the Chinese Academy of Sciences
  • National Natural Science Foundation of China
  • CAS Project for Young Scientists in Basic Research
  • National Key Research and Development Program of China
  • Jilin Province and Chinese Academy of Sciences Science and Technology Cooperation High-Tech Industrialization Special Program

Zitieren

APA

Wang, R., Sun, Y., Wang, X., Li, W., Liu, Z., & Jiang, Y. (2026). Hole–pillar coupled structure: a universal design model for two-dimensional gratings fabricated by dual-beam interference lithography. Photonics Research, 14(1), 22. https://doi.org/10.1364/prj.567789

Vancouver

Wang R, Sun Y, Wang X, Li W, Liu Z, Jiang Y. Hole–pillar coupled structure: a universal design model for two-dimensional gratings fabricated by dual-beam interference lithography. Photonics Research. 2026;14(1):22. doi:10.1364/prj.567789

BibTeX
@article{Wang2026,
  author = {Wang, Ruipeng and Sun, Yuqi and Wang, Xinyu and Li, Wenhao and Liu, Zhaowu and Jiang, Yanxiu},
  title = {Hole–pillar coupled structure: a universal design model for two-dimensional gratings fabricated by dual-beam interference lithography},
  journal = {Photonics Research},
  year = {2026},
  volume = {14},
  number = {1},
  pages = {22},
  doi = {10.1364/prj.567789}
}
Kostenlos starten →