EUVIMEDEUVIMED entdecken
Crossref

3D-printed mode-selective micro-scale photonic lantern spatial (de)multiplexer

Yoav Dana, Yehudit Garcia, Aleksei Kukin, Dan M. Marom

Photonics Research · 01.08.2025 · 13 (8) · 2088

DOI: 10.1364/prj.560445 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Photonics Research, online erschienen am 21.07.2025. Verfasst von Yoav Dana und 3 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 35 Literaturangaben. Gefördert von: Israel Innovation Authority.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

We present the design, fabrication, and characterization of a dual polarization, mode-selective photonic lantern (PL) spatial multiplexer supporting three fiber modes ( L P 01 , L P 11 a , L P 11 b ), measuring only 300 μm in length, for converting between three single-mode input sources and a single three-mode optical fiber. The PL is fabricated directly on the three sources, in this case three cores of a multi-core fiber, using a commercial two-photon polymerization-based 3D nanoprinter. Despite the diminutive size and high index contrast of the polymer core/air cladding waveguides, we observed low insertion loss multiplexing (less than −1.7 dB), low polarization dependent loss (less than −0.25 dB), mode dependent loss of −1.7 dB, low wavelength dependence, and mode group crosstalk of less than −16 dB. We demonstrate mode group multiplexed transmission using our mode-selective multiplexer/demultiplexer pair and a short three-mode fiber link in an on-off keying intensity modulation/direct detection (IM/DD) experiment, recovering two 12.5 Gb/s signals without MIMO processing.

Förderung

  • Israel Innovation Authority

Zitieren

APA

Dana, Y., Garcia, Y., Kukin, A., & Marom, D. M. (2025). 3D-printed mode-selective micro-scale photonic lantern spatial (de)multiplexer. Photonics Research, 13(8), 2088. https://doi.org/10.1364/prj.560445

Vancouver

Dana Y, Garcia Y, Kukin A, Marom DM. 3D-printed mode-selective micro-scale photonic lantern spatial (de)multiplexer. Photonics Research. 2025;13(8):2088. doi:10.1364/prj.560445

BibTeX
@article{Dana2025,
  author = {Dana, Yoav and Garcia, Yehudit and Kukin, Aleksei and Marom, Dan M.},
  title = {3D-printed mode-selective micro-scale photonic lantern spatial (de)multiplexer},
  journal = {Photonics Research},
  year = {2025},
  volume = {13},
  number = {8},
  pages = {2088},
  doi = {10.1364/prj.560445}
}
Kostenlos starten →