EUVIMEDEUVIMED entdecken
Crossref

Numerical analysis of an aluminum-based metal–insulator–metal plasmonic Bragg grating waveguide filter in the near- to mid-infrared

Muhammad Afzaal, Hafiz Ahmed Raza, Muhammad Shahzad, Irfan Toqeer, Ghulam Abbas, Muhammad Qamar, Abdul Ghuffar

Optics Continuum · 15.04.2026 · 5 (4) · 1000

DOI: 10.1364/optcon.590499 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Optics Continuum, online erschienen am 25.03.2026. Verfasst von Muhammad Afzaal und 6 weiteren Autor:innen. Die Arbeit nennt 30 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

An aluminum-based metal–insulator–metal (MIM) Bragg grating waveguide filter operating in the near- to mid-infrared spectral range is numerically investigated. The structure employs air as the dielectric core and periodic geometrical modulation to achieve wavelength-selective Bragg reflection and plasmonic confinement. Finite-element simulations reveal pronounced field localization at resonant wavelengths between 1000 nm and 4600 nm. To ensure a meaningful comparison, the field maps are reported relative to the incident fields of a uniform (non-grated) aluminum–air MIM waveguide under the same mode-port excitation, evaluated at the input plane z = 0. The peak enhancements reach approximately 4.5 for the electric field at the aluminum–air interfaces and 3.8 for the magnetic field within the slot region. Parametric analysis demonstrates that increasing the longitudinal period length (here from L p = 825 to 1728 nm) systematically shifts the Bragg condition toward longer wavelengths, while increasing the total number of periods (from Λ = 18 to Λ = 36) deepens the transmission minima. Within the stopband region, electric-field penetration is strongly suppressed, resulting in reflectance approaching unity. These results demonstrate a compact numerical proof-of-concept aluminum–air MIM Bragg grating filter for near- to mid-infrared wavelength-selective operation and field-engineered nanophotonic design. Practical implementation would require careful control of material quality and geometric tolerances.

Zitieren

APA

Afzaal, M., Raza, H. A., Shahzad, M., Toqeer, I., Abbas, G., Qamar, M., & Ghuffar, A. (2026). Numerical analysis of an aluminum-based metal–insulator–metal plasmonic Bragg grating waveguide filter in the near- to mid-infrared. Optics Continuum, 5(4), 1000. https://doi.org/10.1364/optcon.590499

Vancouver

Afzaal M, Raza HA, Shahzad M, Toqeer I, Abbas G, Qamar M, et al. Numerical analysis of an aluminum-based metal–insulator–metal plasmonic Bragg grating waveguide filter in the near- to mid-infrared. Optics Continuum. 2026;5(4):1000. doi:10.1364/optcon.590499

BibTeX
@article{Afzaal2026,
  author = {Afzaal, Muhammad and Raza, Hafiz Ahmed and Shahzad, Muhammad and Toqeer, Irfan and Abbas, Ghulam and Qamar, Muhammad and Ghuffar, Abdul},
  title = {Numerical analysis of an aluminum-based metal–insulator–metal plasmonic Bragg grating waveguide filter in the near- to mid-infrared},
  journal = {Optics Continuum},
  year = {2026},
  volume = {5},
  number = {4},
  pages = {1000},
  doi = {10.1364/optcon.590499}
}
Kostenlos starten →