EUVIMEDEUVIMED entdecken
Crossref

Highly sensitive ZnO/Ag/BaTiO 3 /MoS 2 hybrid structure-based surface plasmon biosensor for the detection of mycobacterium tuberculosis bacteria

Wahiduzzaman Emon, Md. Faysal Nayan, Samius Salehin, Avik Chaki, Sadia Tuba, Khandakar Md. Ishtiak

Optics Continuum · 15.03.2024 · 3 (3) · 495

DOI: 10.1364/optcon.518074 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Optics Continuum, online erschienen am 13.03.2024. Verfasst von Wahiduzzaman Emon und 5 weiteren Autor:innen. Die Arbeit wurde bisher 46-mal zitiert (Crossref) und nennt 70 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study presents a novel biosensor utilizing surface plasmon resonance (SPR) technology, comprising og zinc oxide (ZnO), silver (Ag), barium titanate (BaTiO 3 ), and molybdenum disulfide (MoS 2 ). The detection of mycobacterium tuberculosis bacteria was accomplished through the utilization of the hybrid structure. The transfer matrix method (TMM) and finite element method are employed to analyze the suggested surface plasmon resonance (SPR) structure. A comparative analysis has been conducted to evaluate the angular sensitivity between normal blood samples (NBS) and cells affected by tuberculosis (TB). The optimization of the performance of the surface plasmon resonance (SPR) structure involves adjusting the thickness of ZnO, Ag and BaTiO 3 layer. The accurate measurement of the full width at half maximum (FWHM), detection accuracy (DA), quality factor and figure of merits (FOM) has also been conducted. The optimal angular sensitivity has been determined to be 10 nm for ZnO, 40 nm for Ag, 1.5 nm for BaTiO 3 , and one layer of MoS 2 with a sensitivity of 525 deg./RIU. Additionally, this study compared the effects on sensitivity of two dimensional materials graphene, WS 2 and MoS 2 . In contrast to the currently available biosensor utilizing surface plasmon resonance (SPR), the suggested structure exhibits higher angular sensitivity. Due to its improved sensitivity, the biosensor under consideration exhibits potential for detecting a wide range of biological analytes and organic compounds.

Zitieren

APA

Emon, W., Nayan, M. F., Salehin, S., Chaki, A., Tuba, S., & Ishtiak, K. M. (2024). Highly sensitive ZnO/Ag/BaTiO 3 /MoS 2 hybrid structure-based surface plasmon biosensor for the detection of mycobacterium tuberculosis bacteria. Optics Continuum, 3(3), 495. https://doi.org/10.1364/optcon.518074

Vancouver

Emon W, Nayan MF, Salehin S, Chaki A, Tuba S, Ishtiak KM. Highly sensitive ZnO/Ag/BaTiO 3 /MoS 2 hybrid structure-based surface plasmon biosensor for the detection of mycobacterium tuberculosis bacteria. Optics Continuum. 2024;3(3):495. doi:10.1364/optcon.518074

BibTeX
@article{Emon2024,
  author = {Emon, Wahiduzzaman and Nayan, Md. Faysal and Salehin, Samius and Chaki, Avik and Tuba, Sadia and Ishtiak, Khandakar Md.},
  title = {Highly sensitive ZnO/Ag/BaTiO 3 /MoS 2 hybrid structure-based surface plasmon biosensor for the detection of mycobacterium tuberculosis bacteria},
  journal = {Optics Continuum},
  year = {2024},
  volume = {3},
  number = {3},
  pages = {495},
  doi = {10.1364/optcon.518074}
}
Kostenlos starten →