EUVIMEDEUVIMED entdecken
Crossref

Fabrication of MoS 2 nanoparticle dispersions using ultrasonic methods: synthesis techniques and optical characterization

Chun-Liang Lai, Riya Karmakar, Yu-Ming Tsao, Song-Cun Lu, Arvind Mukundan, Ping-Hung Liu, Hsiang-Chen Wang

Optical Materials Express · 01.08.2024 · 14 (8) · 2003

DOI: 10.1364/ome.528709 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Optical Materials Express, online erschienen am 19.07.2024. Verfasst von Chun-Liang Lai und 6 weiteren Autor:innen. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 53 Literaturangaben. Gefördert von: Kaohsiung Armed Forces General Hospital, Dalin Tzu Chi Hospital, Buddhist Tzu Chi Medical Foundation-National Chung Cheng University Joint Research Program, National Science and Technology Council.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study outlines the process of preparing a dispersion of MoS 2 nanoparticle from micron sized MoS 2 powder using ultrasonic methods. The optical characteristics of this dispersion were investigated using optical measurement techniques. N-methyl-2-pyrrolidone is chosen as the dispersion solvent due to its surface energy closely matching that of MoS 2 . Consequently, the dispersion that ensued exhibits commendable stability. The MoS 2 dispersion underwent analysis through EDX, scanning electron microscopy, and transmission electron microscopy techniques to examine the correlation between the size of the MoS 2 nanoparticles and the morphology of the dispersion. The dispersion color intensifies with the increase in the wavelength. A He-Cd laser with a wavelength of 325 nm was used to stimulate and generate the matching light source for the generated samples to leverage the photoluminescent attribute of MoS 2 nanoparticles within the range of less than 100 nm. In the Raman measurement graph, distinct peaks can be observed in the generated nanoparticles, providing evidence of their material qualities. The surface morphology of the optical microscopic image was assessed using ultra-spectral imaging technology, allowing for the measurement and acquisition of the associated wavelength spectrum. The particle size in the dispersion was measured using the dynamic light scattering technique. These tests demonstrate that the process can be fine-tuned by adjusting parameters, such as ultrasonic oscillation time and centrifugal time. This process can also yield MoS 2 nanoparticle dispersions in various sizes, each exhibiting distinct photoluminescence characteristics corresponding to the excited light wavelength.

Förderung

  • Kaohsiung Armed Forces General Hospital
  • Dalin Tzu Chi Hospital, Buddhist Tzu Chi Medical Foundation-National Chung Cheng University Joint Research Program
  • National Science and Technology Council

Zitieren

APA

Lai, C., Karmakar, R., Tsao, Y., Lu, S., Mukundan, A., Liu, P., & Wang, H. (2024). Fabrication of MoS 2 nanoparticle dispersions using ultrasonic methods: synthesis techniques and optical characterization. Optical Materials Express, 14(8), 2003. https://doi.org/10.1364/ome.528709

Vancouver

Lai C, Karmakar R, Tsao Y, Lu S, Mukundan A, Liu P, et al. Fabrication of MoS 2 nanoparticle dispersions using ultrasonic methods: synthesis techniques and optical characterization. Optical Materials Express. 2024;14(8):2003. doi:10.1364/ome.528709

BibTeX
@article{Lai2024,
  author = {Lai, Chun-Liang and Karmakar, Riya and Tsao, Yu-Ming and Lu, Song-Cun and Mukundan, Arvind and Liu, Ping-Hung and Wang, Hsiang-Chen},
  title = {Fabrication of MoS 2 nanoparticle dispersions using ultrasonic methods: synthesis techniques and optical characterization},
  journal = {Optical Materials Express},
  year = {2024},
  volume = {14},
  number = {8},
  pages = {2003},
  doi = {10.1364/ome.528709}
}
Kostenlos starten →