3D printed structures with a tailored refraction index fabricated with an acrylate resin modified by a conjugated polymer
Optical Materials Express · 01.07.2024 · 14 (7) · 1779
DOI: 10.1364/ome.518080 ↗Kurz gefasst
Fachartikel in der Zeitschrift Optical Materials Express, online erschienen am 11.06.2024. Verfasst von Fábio Galvão Borges und 11 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 43 Literaturangaben. Gefördert von: Conselho Nacional de Desenvolvimento Científico e Tecnológico, Fibracem Teleinformática Ltda.
Abstract (Originalsprache)
Resins for 3D printing usually do not present suitable photoluminescence for application in optoelectronic devices. Herein, a conjugated polymer (PFeBSe) with luminescent and high refraction index properties was synthesized and used to modify an acrylate-based resin. This PFeBSe copolymer presents an ester-based side group that enhances the compatibility with the acrylate resin, resulting in a homogeneous polymeric blend. Further, the modified resin was employed with the 3D digital light processing (DLP) technique to produce luminescent guiding structures with a tailored refraction index. To maintain the processing parameters of the acrylate resin, the blending with the conjugated polymer was kept at a low concentration in the range of 5% to 15% (v/v). The blending changed the refraction index of the pristine acrylate from 1.49 to 1.51 (5% v/v) and 1.56 (15% v/v), respectively. Moreover, the resulting structures present a low extinction coefficient at the wavelength region above 600 nm. These characteristics enable the fabrication of structures with controllable forms and dimensions that can be used in the design of advanced sensors and optoelectronic devices.
Förderung
- Conselho Nacional de Desenvolvimento Científico e Tecnológico
- Fibracem Teleinformática Ltda
Zitieren
APA
Borges, F. G., Denadai, B. B., Cezar, F. C. S., Toledo, H. J., Cunha, L. V. P., Tarczewski, L., Barbosas, J. V., González, J. C., Macedo, A. G., Rodrigues, P. C., Volpato, N., & Pohl, A. D. A. P. (2024). 3D printed structures with a tailored refraction index fabricated with an acrylate resin modified by a conjugated polymer. Optical Materials Express, 14(7), 1779. https://doi.org/10.1364/ome.518080
Vancouver
Borges FG, Denadai BB, Cezar FCS, Toledo HJ, Cunha LVP, Tarczewski L, et al. 3D printed structures with a tailored refraction index fabricated with an acrylate resin modified by a conjugated polymer. Optical Materials Express. 2024;14(7):1779. doi:10.1364/ome.518080
BibTeX
@article{Borges2024,
author = {Borges, Fábio Galvão and Denadai, Bruno Benegra and Cezar, Francisco Cano Silva and Toledo, Harison J. and Cunha, Leonardo V. P. and Tarczewski, Leonardo and Barbosas, Juscelino Valter and González, Juan C. and Macedo, Andreia Gerniski and Rodrigues, Paula Cristina and Volpato, Neri and Pohl, Alexandre de Almeida Prado},
title = {3D printed structures with a tailored refraction index fabricated with an acrylate resin modified by a conjugated polymer},
journal = {Optical Materials Express},
year = {2024},
volume = {14},
number = {7},
pages = {1779},
doi = {10.1364/ome.518080}
}
EUVIMED