Laser-welded high-stability all-silicon dual-cavity MEMS Fabry–Perot pressure sensor with self-temperature compensation
Optics Letters · 01.08.2026 · 51 (15) · 4196
DOI: 10.1364/ol.601490 ↗Kurz gefasst
Fachartikel in der Zeitschrift Optics Letters, online erschienen am 22.07.2026. Verfasst von Penghui Dai und 8 weiteren Autor:innen. Die Arbeit nennt 15 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Tianjin Municipal Science and Technology Commission.
Abstract (Originalsprache)
This Letter presents a laser-welded all-silicon dual-cavity MEMS Fabry–Perot sensor operating from 0.5 kPa to 3.5 MPa over a temperature range of −40 to 125 °C. Adhesive-free laser-welded integration and encapsulation of the sensor chip and optical fiber ferrule are achieved using a carbon dioxide laser, enhancing structural reliability. Compared with previous all-silicon dual-cavity FP sensors, the key advance of this work lies in the laser-welded fiber integration, which suppresses thermally induced cavity drift and enables stable pressure-temperature decoupling over the full operating temperature range. Temperature sensing is realized through the combined thermo-optic and thermal expansion effects within the silicon substrate cavity, while pressure is determined based on the pressure-sensitive response of the vacuum cavity. To mitigate cross-sensitivity, a piecewise linearization method is employed for pressure–temperature decoupling and in situ temperature compensation. At 125 °C, temperature compensation improves pressure accuracy from 0.404% FS to 0.195% FS during pressurization and from 0.398% FS to 0.062% FS during depressurization. These results demonstrate the potential of the proposed sensor for reliable pressure sensing over a wide temperature range.
Förderung
- National Natural Science Foundation of China
- Tianjin Municipal Science and Technology Commission
Zitieren
APA
Dai, P., Lin, H., Guo, Q., Liu, H., Xiang, X., Wu, X., Jiang, J., Liu, T., & Wang, S. (2026). Laser-welded high-stability all-silicon dual-cavity MEMS Fabry–Perot pressure sensor with self-temperature compensation. Optics Letters, 51(15), 4196. https://doi.org/10.1364/ol.601490
Vancouver
Dai P, Lin H, Guo Q, Liu H, Xiang X, Wu X, et al. Laser-welded high-stability all-silicon dual-cavity MEMS Fabry–Perot pressure sensor with self-temperature compensation. Optics Letters. 2026;51(15):4196. doi:10.1364/ol.601490
BibTeX
@article{Dai2026,
author = {Dai, Penghui and Lin, Haojun and Guo, Quan and Liu, Hongyu and Xiang, Xuesong and Wu, Xueyi and Jiang, Junfeng and Liu, Tiegen and Wang, Shuang},
title = {Laser-welded high-stability all-silicon dual-cavity MEMS Fabry–Perot pressure sensor with self-temperature compensation},
journal = {Optics Letters},
year = {2026},
volume = {51},
number = {15},
pages = {4196},
doi = {10.1364/ol.601490}
}
EUVIMED