EUVIMEDEUVIMED entdecken
Crossref

Low-loss splicing between anti-reflection coated SMF and hollow-core fiber without back-reflection degradation

Cong Zhang, Jiajie Chen, Di Lin, Jianping Li, Meng Xiang, Yuwen Qin, Radan Slavík, Songnian Fu

Optics Letters · 01.01.2026 · 51 (1) · 193

DOI: 10.1364/ol.583364 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Optics Letters, online erschienen am 23.12.2025. Verfasst von Cong Zhang und 7 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 10 Literaturangaben. Gefördert von: National Key Research and Development Program of China, National Natural Science Foundation of China, Basic and Applied Basic Research Foundation of Guangdong Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Anti-reflection (AR) coating is an effective technique for reducing back-reflection and insertion loss (IL) in the interconnection between standard single-mode fiber (SSMF) and hollow-core fiber (HCF). However, the difference in thermal expansion coefficient between the fiber and coating leads to performance degradation during fusion splicing. To address this limitation, we report an embedded fiber splicing technique that uses a tapered borosilicate glass tube (BGT) as a splicing bridge, thereby avoiding direct heating of the AR coating. Theoretical analysis shows that a minimal IL of 0.13 dB can be achieved by optimizing the structural parameters, including the GRIN length and the air-cavity length, when the HCF mode field diameter ranges from 17 to 21 μm. Then, the SSMF with an AR-coated GRIN end is inserted into a tapered BGT, with the untapered side spliced to the HCF. By managing the GRIN length, the air gap, and the splicing offset, a low-IL interconnection can be achieved without the back-reflection penalty. Finally, an SSMF-HCF-SSMF interconnection link with an IL of 0.6 dB and a back-reflection of −33.8 dB is experimentally achieved. Meanwhile, higher-order mode coupling is well suppressed to below −35 dB. The proposed embedded splicing technique can facilitate HCF applications in a harsh environment.

Förderung

  • National Key Research and Development Program of China
  • National Natural Science Foundation of China
  • Basic and Applied Basic Research Foundation of Guangdong Province
  • Guangdong Provincial Introduction of Innovative Research and Development Team

Zitieren

APA

Zhang, C., Chen, J., Lin, D., Li, J., Xiang, M., Qin, Y., Slavík, R., & Fu, S. (2026). Low-loss splicing between anti-reflection coated SMF and hollow-core fiber without back-reflection degradation. Optics Letters, 51(1), 193. https://doi.org/10.1364/ol.583364

Vancouver

Zhang C, Chen J, Lin D, Li J, Xiang M, Qin Y, et al. Low-loss splicing between anti-reflection coated SMF and hollow-core fiber without back-reflection degradation. Optics Letters. 2026;51(1):193. doi:10.1364/ol.583364

BibTeX
@article{Zhang2026,
  author = {Zhang, Cong and Chen, Jiajie and Lin, Di and Li, Jianping and Xiang, Meng and Qin, Yuwen and Slavík, Radan and Fu, Songnian},
  title = {Low-loss splicing between anti-reflection coated SMF and hollow-core fiber without back-reflection degradation},
  journal = {Optics Letters},
  year = {2026},
  volume = {51},
  number = {1},
  pages = {193},
  doi = {10.1364/ol.583364}
}
Kostenlos starten →