EUVIMEDEUVIMED entdecken
Crossref

Dual high-order QAM-modulated mm-wave signal transmission in the Q-band enabled by simple IM/DD architecture and bandpass delta-sigma modulation

Hengxin Yan, Xinying Li, Xiaolong Pan, Tangyao Xie, Liye Fang, Jiahao Bi, Han Jiang, Xiangjun Xin

Optics Letters · 15.04.2024 · 49 (8) · 1919

DOI: 10.1364/ol.521343 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Optics Letters, online erschienen am 03.04.2024. Verfasst von Hengxin Yan und 7 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 11 Literaturangaben. Gefördert von: National Key Research and Development Program of China, National Natural Science Fund for Excellent Young Scientists Fund Program, National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The intensity-modulation (IM)/direct-detection (DD) systems have been proven effective and low-cost due to their simple system architecture. However, the Mach–Zehnder modulator (MZM) of the IM/DD systems only reserves its driving signal intensity. Therefore, the IM/DD systems are generally unable to transmit vector signals and have a restricted spectrum efficiency and channel capacity. Similarly, the radio-over-fiber (RoF) transmission systems based on IM/DD are limited by their simple architecture and generally cannot transmit high-order quadrature amplitude modulation (QAM) signals, which hinders the improvement of their spectrum efficiency. To address the challenges, we propose a novel, to the best of our knowledge, scheme to simultaneously transmit the dual independent high-order QAM-modulated millimeter-wave (mm-wave) signals in the RoF system with a simple IM/DD architecture, enabled by precoding-based optical carrier suppression (OCS) modulation and bandpass delta-sigma modulation (BP-DSM). The dual independent signals can carry different information, which increases channel capacity and improves spectrum efficiency and system flexibility. Based on our proposed scheme, we experimentally demonstrate the dual 512-QAM mm-wave signal transmission in the Q-band (33–50 GHz) under three different scenarios: 1) dual single-carrier (SC) signal transmission, 2) dual orthogonal-frequency-division-multiplexing (OFDM) signal transmission, and 3) hybrid SC and OFDM signal transmission. We achieve high-fidelity transmission of dual 512-QAM vector signals over a 5 km single-mode fiber (SMF) and a 1-m single-input single-output (SISO) wireless link operating in the Q-band, with the bit error rates (BERs) of all three scenarios below the hard decision forward error correction (HD-FEC) threshold of 3.8 × 10 −3 . To the best of our knowledge, this is the first time dual high-order QAM-modulated mm-wave signal transmission has been achieved in a RoF system with a simple IM/DD architecture.

Förderung

  • National Key Research and Development Program of China
  • National Natural Science Fund for Excellent Young Scientists Fund Program
  • National Natural Science Foundation of China

Zitieren

APA

Yan, H., Li, X., Pan, X., Xie, T., Fang, L., Bi, J., Jiang, H., & Xin, X. (2024). Dual high-order QAM-modulated mm-wave signal transmission in the Q-band enabled by simple IM/DD architecture and bandpass delta-sigma modulation. Optics Letters, 49(8), 1919. https://doi.org/10.1364/ol.521343

Vancouver

Yan H, Li X, Pan X, Xie T, Fang L, Bi J, et al. Dual high-order QAM-modulated mm-wave signal transmission in the Q-band enabled by simple IM/DD architecture and bandpass delta-sigma modulation. Optics Letters. 2024;49(8):1919. doi:10.1364/ol.521343

BibTeX
@article{Yan2024,
  author = {Yan, Hengxin and Li, Xinying and Pan, Xiaolong and Xie, Tangyao and Fang, Liye and Bi, Jiahao and Jiang, Han and Xin, Xiangjun},
  title = {Dual high-order QAM-modulated mm-wave signal transmission in the Q-band enabled by simple IM/DD architecture and bandpass delta-sigma modulation},
  journal = {Optics Letters},
  year = {2024},
  volume = {49},
  number = {8},
  pages = {1919},
  doi = {10.1364/ol.521343}
}
Kostenlos starten →