EUVIMEDEUVIMED entdecken
Crossref

Adjustment-free two-sided 3D direct laser writing for aligned micro-optics on both substrate sides

Michael Schmid, Simon Thiele, Alois Herkommer, Harald Giessen

Optics Letters · 01.01.2023 · 48 (1) · 131

DOI: 10.1364/ol.476448 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Optics Letters, online erschienen am 22.12.2022. Verfasst von Michael Schmid und 3 weiteren Autor:innen. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 23 Literaturangaben. Gefördert von: Ministerium für Wissenschaft, Forschung und Kunst Baden-Württemberg, European Research Council, Baden-Württemberg Stiftung.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

3D direct laser writing is a powerful and widely used tool to create complex micro-optics. The fabrication method offers two different writing modes. During the immersion mode, an immersion medium is applied between the objective and the substrate while the photoresist is exposed on its back side. Alternatively, when using the dip-in mode, the objective is in direct contact with the photoresist and the structure is fabricated on the objective facing side of the substrate. In this Letter, we demonstrate the combination of dip-in and photoresist immersion printing, by using the photoresist itself as immersion medium. This way, two parts of a doublet objective can be fabricated on the front and back sides of a substrate, using it as a spacer with a lateral registration below 1 µm and without the need of additional alignment. This approach also enables the alignment free combination of different photoresists on the back and front sides. We use this benefit by printing a black aperture on the back of the substrate, while the objective lens is printed on the front.

Förderung

  • Ministerium für Wissenschaft, Forschung und Kunst Baden-Württemberg
  • European Research Council
  • Baden-Württemberg Stiftung
  • Bundesministerium für Bildung und Forschung
  • Deutsche Forschungsgemeinschaft

Zitieren

APA

Schmid, M., Thiele, S., Herkommer, A., & Giessen, H. (2023). Adjustment-free two-sided 3D direct laser writing for aligned micro-optics on both substrate sides. Optics Letters, 48(1), 131. https://doi.org/10.1364/ol.476448

Vancouver

Schmid M, Thiele S, Herkommer A, Giessen H. Adjustment-free two-sided 3D direct laser writing for aligned micro-optics on both substrate sides. Optics Letters. 2023;48(1):131. doi:10.1364/ol.476448

BibTeX
@article{Schmid2023,
  author = {Schmid, Michael and Thiele, Simon and Herkommer, Alois and Giessen, Harald},
  title = {Adjustment-free two-sided 3D direct laser writing for aligned micro-optics on both substrate sides},
  journal = {Optics Letters},
  year = {2023},
  volume = {48},
  number = {1},
  pages = {131},
  doi = {10.1364/ol.476448}
}
Kostenlos starten →