Spatial light modulator–based polarizing nulling interferometer for quantitative measurement of multiple optical surface geometries
Optics Express · 16.11.2026 · 34 (23) · 45016
DOI: 10.1364/oe.618702 ↗Kurz gefasst
Fachartikel in der Zeitschrift Optics Express, online erschienen am 12.11.2026. Verfasst von Dahi Ghareab Abdelsalam Ibrahim und 2 weiteren Autor:innen. Beteiligte Einrichtung: Applied Optics Group, Physics Unit, School of Natural Sciences, University of Galway, Galway, Ireland. Die Arbeit nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Disruptive Technologies Innovation Fund, ISetup of the SLM-Based Polarizing Nulling Interferometerrish Research eLibrary.
Abstract (Originalsprache)
We present a spatial light modulator (SLM)-based polarizing nulling interferometer for quantitative characterization of plane, concave, and convex optical surfaces. A reflective phase-only SLM is employed as a programmable wavefront generator to synthesize null wavefronts, enabling rapid adaptation to different test surfaces without surface-specific computer-generated holograms (CGHs). Polarization multiplexing separates the reference and test wavefronts into orthogonal polarization states, enabling a compact and stable interferometric configuration. The nonlinear SLM phase response was experimentally calibrated to enable accurate phase encoding through inverse gray-level mapping. Off-axis and circular fringe patterns were reconstructed using 2D Fourier-transform and Hilbert-transform methods, respectively. The system was experimentally validated using a λ/10 plane mirror, a 75-mm-diameter concave mirror with a 400-mm radius of curvature, and a 50-mm-diameter convex mirror with a 200-mm radius of curvature. For the concave and convex mirrors, SLM compensation reduced the fringe-order range from approximately 35 to 4 and from 69 to 26, respectively. The reconstructed surface profiles agreed with spherical models, with differences of 44 and 23 nm in peak-to-valley surface departure, while ray-tracing simulations reproduced the measured fringe distributions. Transverse characterization was further demonstrated using a fixed central compensation phase and a local self-nulling strategy. For ±6 mm displaced regions, local compensation reduced the fringe-order range from approximately 220 to 85, corresponding to a 61% reduction. These results demonstrate programmable partial nulling and fringe-density reduction for curved optical surfaces. Complete nulling was not achieved because of the SLM's limited active aperture (15.56 × 9.22 mm) and maximum phase modulation of 2π.
Autor:innen und Institutionen
- Applied Optics Group, Physics Unit, School of Natural Sciences, University of Galway, Galway, Ireland.
- Engineering and Surface Metrology Lab., National Institute of Standards, Tersa St., El Haram, El Giza, Egypt.
- MBRYONICS Ltd., Galway, Ireland.
ORCID-Profile: Dahi Ghareab Abdelsalam Ibrahim, Andrew LamberT
Förderung
- Disruptive Technologies Innovation Fund
- ISetup of the SLM-Based Polarizing Nulling Interferometerrish Research eLibrary
Zitieren
APA
Ibrahim, D. G. A., LamberT, A., & Devaney, N. (2026). Spatial light modulator–based polarizing nulling interferometer for quantitative measurement of multiple optical surface geometries. Optics Express, 34(23), 45016. https://doi.org/10.1364/oe.618702
Vancouver
Ibrahim DGA, LamberT A, Devaney N. Spatial light modulator–based polarizing nulling interferometer for quantitative measurement of multiple optical surface geometries. Optics Express. 2026;34(23):45016. doi:10.1364/oe.618702
BibTeX
@article{Ibrahim2026,
author = {Ibrahim, Dahi Ghareab Abdelsalam and LamberT, Andrew and Devaney, Nicholas},
title = {Spatial light modulator–based polarizing nulling interferometer for quantitative measurement of multiple optical surface geometries},
journal = {Optics Express},
year = {2026},
volume = {34},
number = {23},
pages = {45016},
doi = {10.1364/oe.618702}
}
EUVIMED