Surface finishing of additively manufactured aspherical lenses using vacuum-shaped PVC thin films
Optics Express · 02.11.2026 · 34 (22) · 42840
DOI: 10.1364/oe.611710 ↗Kurz gefasst
Fachartikel in der Zeitschrift Optics Express, online erschienen am 30.10.2026. Verfasst von Daniel Aguirre-Aguirre und 3 weiteren Autor:innen. Beteiligte Einrichtung: Instituto de Ciencias Aplicadas y Tecnología, Universidad Nacional Autónoma de México, Cd. Universitaria, Apdo. Postal 70-186, 04510, CD MX., Mexico. Die Arbeit nennt 24 Literaturangaben. Gefördert von: Universidad Nacional Autónoma de México.
Abstract (Originalsprache)
The surface finish of both refractive and reflective optics constitutes a critical parameter that manufacturers must carefully address. A major limitation arises when optical elements are fabricated through additive manufacturing, as the layer-by-layer deposition process produces a characteristic “staircase effect” on the surface. To overcome this challenge, we propose a vacuum-shaped polyvinyl chloride (PVC) thin-film technique to eliminate the staircase effect and achieve high-quality surface finishing of additively manufactured optics. This approach offers the advantages of reduced post-processing time, lower fabrication costs, and scalable production. The results of the surface profilometry measurements revealed differences between the theoretical and the post-processed lenses of ≤ 14.5 µm in RMS and 63.3 µm in PV. Surface roughness measurements yielded Ra values ≤ 7.13 ± 2.07 nm. Furthermore, wavefront measurements showed differences of ≤11.6 µm in RMS and ≤64.2 in PV between the glass and resin lenses. The proposed method provides an accessible post-processing alternative for enhancing the optical quality of additively manufactured lenses, with potential applications in cost-efficient imaging systems and assistive visual technologies.
Autor:innen und Institutionen
- Instituto de Ciencias Aplicadas y Tecnología, Universidad Nacional Autónoma de México, Cd. Universitaria, Apdo. Postal 70-186, 04510, CD MX., Mexico.
- Unidad de Investigación y Tecnología Aplicadas, Universidad Nacional Autónoma de México, Vía de la Innovación No. 410, Autopista Monterrey-Aeropuerto Km.10, PIIT, 66629, Cd. Apodaca, Nuevo León, Mexico.
- Departamento de Física y Matemáticas, Universidad de Monterrey, Av. Ignacio Morones Prieto 4500 Pte., C.P. 66238, San Pedro Garza García, Nuevo León, Mexico.
ORCID-Profile: Daniel Aguirre-Aguirre, Brenda Villalobos-Mendoza, Jorge de Jesús Alvarado-Martínez, Manuel Campos-García
Förderung
- Universidad Nacional Autónoma de México
Zitieren
APA
Aguirre-Aguirre, D., Villalobos-Mendoza, B., de Jesús Alvarado-Martínez, J., & Campos-García, M. (2026). Surface finishing of additively manufactured aspherical lenses using vacuum-shaped PVC thin films. Optics Express, 34(22), 42840. https://doi.org/10.1364/oe.611710
Vancouver
Aguirre-Aguirre D, Villalobos-Mendoza B, de Jesús Alvarado-Martínez J, Campos-García M. Surface finishing of additively manufactured aspherical lenses using vacuum-shaped PVC thin films. Optics Express. 2026;34(22):42840. doi:10.1364/oe.611710
BibTeX
@article{AguirreAguirre2026,
author = {Aguirre-Aguirre, Daniel and Villalobos-Mendoza, Brenda and de Jesús Alvarado-Martínez, Jorge and Campos-García, Manuel},
title = {Surface finishing of additively manufactured aspherical lenses using vacuum-shaped PVC thin films},
journal = {Optics Express},
year = {2026},
volume = {34},
number = {22},
pages = {42840},
doi = {10.1364/oe.611710}
}
EUVIMED