Closed-form analytical method for tolerance effects in off-axis reflective multi-mirror systems based on Fermat’s principle
Optics Express · 10.08.2026 · 34 (16) · 30698
DOI: 10.1364/oe.607964 ↗Kurz gefasst
Fachartikel in der Zeitschrift Optics Express, online erschienen am 07.08.2026. Verfasst von Tongyu Xu und 4 weiteren Autor:innen. Die Arbeit nennt 33 Literaturangaben. Gefördert von: Ministry of Science and Technology of the People's Republic of China.
Abstract (Originalsprache)
For off-axis multi-mirror and freeform optical systems, tolerance analysis is challenging because of the large number of tolerance variables and the nonlinear coupling among different errors. This paper presents a closed-form analytical framework for evaluating tolerance-induced effects in off-axis multi-mirror systems. The proposed framework uses a Fermat-principle-based ray model formulated with intersection-coordinate polynomials and incorporates alignment, curvature, and surface-parameter errors into the stationary equations in a unified manner. Through recursive implicit differentiation, analytical expressions are derived at successive surfaces for first-order tolerance effects, second-order self-effects, and second-order cross effects in ray-surface intersection coordinates, equivalent image-plane coordinates, and outgoing chief-ray direction. The explicitly derived formulation describes the first-order effects and the nonlinear self and cross effects at second order. Higher order terms can be obtained by continuing the same recursive differentiation procedure, and the retained tolerance expansion order is selected through convergence assessment according to the perturbation range and required accuracy. The method is validated with three optical systems of increasing complexity, containing one, three, and four mirrors, respectively. The first system isolates the direct tolerance response of a single reflecting surface. The second examines the propagation of tolerance effects through successive reflections and the convergence of the root mean square spot diameter and line of sight variation. The third is used to identify dominant tolerances, evaluate their combined effects, and determine tolerance ranges at a selected field point. For the system with three mirrors, retaining the tolerance expansion through fifth order gives maximum errors of 0.454% in the RMS spot diameter and 0.313 arcsec in the total line of sight variation. For the system with four mirrors, the second-order expansion is sufficient within the selected tolerance ranges, giving a maximum absolute relative error of 0.334% in the RMS spot diameter over the 3375 sampled combined-tolerance cases. For a selected field point, recommended ranges for three dominant tolerances are obtained and further verified through Monte Carlo analysis, demonstrating the capability of the proposed method for field-specific tolerance-range determination.
Förderung
- Ministry of Science and Technology of the People's Republic of China
Zitieren
APA
Xu, T., Li, X., Wen, D., Yuan, H., & Chen, Q. (2026). Closed-form analytical method for tolerance effects in off-axis reflective multi-mirror systems based on Fermat’s principle. Optics Express, 34(16), 30698. https://doi.org/10.1364/oe.607964
Vancouver
Xu T, Li X, Wen D, Yuan H, Chen Q. Closed-form analytical method for tolerance effects in off-axis reflective multi-mirror systems based on Fermat’s principle. Optics Express. 2026;34(16):30698. doi:10.1364/oe.607964
BibTeX
@article{Xu2026,
author = {Xu, Tongyu and Li, Xuyang and Wen, Desheng and Yuan, Hao and Chen, Qinfang},
title = {Closed-form analytical method for tolerance effects in off-axis reflective multi-mirror systems based on Fermat’s principle},
journal = {Optics Express},
year = {2026},
volume = {34},
number = {16},
pages = {30698},
doi = {10.1364/oe.607964}
}
EUVIMED