System-level diffraction efficiency modeling and ruling fabrication of convex blazed gratings
Optics Express · 10.08.2026 · 34 (16) · 29298
DOI: 10.1364/oe.606123 ↗Kurz gefasst
Fachartikel in der Zeitschrift Optics Express, online erschienen am 29.07.2026. Verfasst von Shuo Yu und 10 weiteren Autor:innen. Die Arbeit nennt 37 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Jilin Province Science and Technology Department.
Abstract (Originalsprache)
In hyperspectral imaging systems, the convex blazed grating is a critical component that combines dispersion with imaging. Its diffraction efficiency directly determines the signal-to-noise ratio and resolving power of the system. However, most diffraction efficiency analyses are based on a local planar approximation and assume a single incidence angle, which cannot accurately describe the full-aperture efficiency variation caused by the curvature and aperture in an actual system. Moreover, current fabrication methods for convex blazed gratings still exhibit limitations in achieving large apertures, small radii of curvature, and adaptability to a wide range of parameters. To address these issues, this paper presents a diffraction efficiency evaluation framework that combines rigorous coupled-wave analysis with full-aperture integration. It predicts the overall diffraction efficiency of convex blazed gratings as a function of radius of curvature and aperture. When the efficiency curve exhibits a high peak and steep slope, the global efficiency differs significantly from the local single-point calculation, with a discrepancy of up to 12.8%. This discrepancy further increases with a larger aperture or a smaller radius of curvature. In contrast, the discrepancy diminishes considerably. Second, this work applies mechanical ruling to the fabrication of convex blazed gratings for the first time, taking full advantage of the uniquely low surface roughness and high uniformity of ruling. The ruling trajectory is constructed using an orthogonal rotary axis configuration. Error analysis indicates that the specific alignment errors of the convex substrate have a negligible impact on both the grating constant and diffraction efficiency. Finally, two convex blazed gratings are fabricated, covering groove densities from 20 to 1000 gr/mm, radii of curvature from 50 to 235 mm, blaze angles of 1.44° and 16.62°, and a maximum aperture size of 60 mm × 60 mm. The measured global diffraction efficiency agrees with the theoretical model within 2.4%. These results establish a complete technical pathway from system-level efficiency modeling to high-precision engineering fabrication for convex blazed gratings, providing new theoretical and engineering methods for the design and manufacture of convex gratings in next generation high-resolution, high-sensitivity imaging spectrometers.
Förderung
- National Natural Science Foundation of China
- Jilin Province Science and Technology Department
Zitieren
APA
Yu, S., Yu, H., Zhang, B., Wang, R., Liang, H., Wang, Y., Yao, X., Galantu, J., Heshig, B., Zhang, L., & Li, W. (2026). System-level diffraction efficiency modeling and ruling fabrication of convex blazed gratings. Optics Express, 34(16), 29298. https://doi.org/10.1364/oe.606123
Vancouver
Yu S, Yu H, Zhang B, Wang R, Liang H, Wang Y, et al. System-level diffraction efficiency modeling and ruling fabrication of convex blazed gratings. Optics Express. 2026;34(16):29298. doi:10.1364/oe.606123
BibTeX
@article{Yu2026,
author = {Yu, Shuo and Yu, Hongzhu and Zhang, Bo and Wang, Ruibo and Liang, Hongzhi and Wang, Yilong and Yao, Xuefeng and Galantu, Jiri and Heshig, Bayan and Zhang, Lei and Li, Wenhao},
title = {System-level diffraction efficiency modeling and ruling fabrication of convex blazed gratings},
journal = {Optics Express},
year = {2026},
volume = {34},
number = {16},
pages = {29298},
doi = {10.1364/oe.606123}
}
EUVIMED