Metal-all dielectric optical filters in an Rb hot vapor-based atomic clock
Optics Express · 10.08.2026 · 34 (16) · 30613
DOI: 10.1364/oe.605872 ↗Kurz gefasst
Fachartikel in der Zeitschrift Optics Express, online erschienen am 07.08.2026. Verfasst von A. Mirzaei und 1 weiteren Autor:innen. Die Arbeit nennt 37 Literaturangaben.
Abstract (Originalsprache)
The metal-all-dielectric optical filter in the physics package of a lamp-pumped rubidium atomic clock was investigated as a compact passive filter to condition the light emitted by the rubidium lamp. The use of such a design could enable spectral conditioning of devices using natural rubidium and reduce reliance on isotope-enriched 85 Rb vapor cells. In the case of lamp-pumped atomic clocks, the broad spectrum due to the presence of different noble gases in the rubidium lamp and their distinct emission lines in the lamp radiation could cause an increase in the optical background, a decrease in double-resonance contrast, additional optical pumping, and degradation of the microwave–optical double-resonance discriminator signal. To solve the problem described above, a one-dimensional defective metal–dielectric photonic crystal filter was designed, manufactured, and used in a rubidium atomic clock physics package. The simulation results obtained via the transfer matrix method revealed that the proposed structure can generate a wavelength-selective defect-mode passband within the photonic band gap, with efficient electric-field localization and group delay in the main defect-mode region. Conversely, our experimental results with a defective photonic crystal filter and a 600 nm long-pass optical filter, indicated that the photonic crystal filter provided higher wavelength-scale spectral selectivity, suppressed a significant fraction of the unwanted broadband lamp background, and preferentially transmitted the spectral region containing the rubidium D-line emissions. This would yield a suitable double-resonance signal for error-signal extraction compared with the case where the long-pass filter was used. The photonic-crystal thin-film filters increased the peak-to-peak double-resonance amplitude by approximately 11.3 times. They increased the zero-crossing frequency-discrimination slope by approximately 11.8 compared with that of the 600 nm long-pass filter. The equivalent RMS frequency noise of the open-loop discriminator signal decreased from about 95 Hz to about 17 Hz. However, this does not imply that thin-film photonic crystal filters can fully replace conventional rubidium atomic filter cells. Rather, this aim explores a cost-reduction approach using a natural-abundance rubidium cell and reduces the need for additional enriched 85 Rb vapor filter cells. These results suggest that photonic-crystal thin-film filters can be useful passive spectral-conditioning elements for compact lamp-pumped rubidium atomic-clock physics packages.
Zitieren
APA
Mirzaei, A., & Hamidi, S. M. (2026). Metal-all dielectric optical filters in an Rb hot vapor-based atomic clock. Optics Express, 34(16), 30613. https://doi.org/10.1364/oe.605872
Vancouver
Mirzaei A, Hamidi SM. Metal-all dielectric optical filters in an Rb hot vapor-based atomic clock. Optics Express. 2026;34(16):30613. doi:10.1364/oe.605872
BibTeX
@article{Mirzaei2026,
author = {Mirzaei, A. and Hamidi, S. M.},
title = {Metal-all dielectric optical filters in an Rb hot vapor-based atomic clock},
journal = {Optics Express},
year = {2026},
volume = {34},
number = {16},
pages = {30613},
doi = {10.1364/oe.605872}
}
EUVIMED