EUVIMEDEUVIMED entdecken
Crossref

Kilohertz linewidth VCSEL with an external high Q-factor intrinsic optical fiber Fabry-Pérot cavity

Wenxuan Huang, Leilei Shi, Lei Zhai, Weili Luo, Da Wei, Liyang Jin, Yujia Li, Tao Zhu

Optics Express · 01.06.2026 · 34 (11) · 20611

DOI: 10.1364/oe.598993 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Optics Express, online erschienen am 27.05.2026. Verfasst von Wenxuan Huang und 7 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 31 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Importing optical feedback from an external cavity has been widely used for linewidth narrowing in semiconductor lasers. Unlike edge-emitting laser diodes with anti-reflection coating, the reflectivity of the output mirror of a vertical-cavity surface-emitting laser (VCSEL) is usually higher than 99%, meaning that stronger optical feedback is preferred for narrow linewidth operation. Here, we leverage the inherently circularly symmetric optical field distribution and the strong feedback from an external high Q-factor intrinsic optical fiber Fabry–Pérot (FP) cavity to significantly enhance the feedback efficiency and narrow the linewidth of a VCSEL to the level of kilohertz. The FP cavity with a loaded Q-factor on the order of 10 6 consists of two identical fiber Bragg gratings (FBGs). Experimental results show that the measured linewidth of a VCSEL, extracted from the short-delay self-heterodyne spectrum, can be narrowed from 2.5 MHz to 2.1 kHz under optimized locking conditions by the resonant feedback from an intrinsic FP cavity with a loaded Q-factor of 8.74 × 10 6 . The white frequency noise is reduced to ∼263 Hz 2 /Hz, corresponding to a calculated intrinsic linewidth of ∼789 Hz. In addition, another FP cavity with an enlarged free spectrum range (FSR) and a loaded Q-factor of 4.8 × 10 6 is used to narrow the linewidth without the simultaneous excitation of the two polarization modes. The measured linewidth and white frequency noise of the VCSEL with such an external FP cavity are 4.7 kHz and ∼251 Hz 2 /Hz, respectively. These results provide a proof-of-concept demonstration that a high-Q intrinsic optical fiber FP cavity can serve as an efficient external feedback element for kilohertz-level linewidth narrowing of VCSELs, while further stabilization and packaging are required for practical applications.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Huang, W., Shi, L., Zhai, L., Luo, W., Wei, D., Jin, L., Li, Y., & Zhu, T. (2026). Kilohertz linewidth VCSEL with an external high Q-factor intrinsic optical fiber Fabry-Pérot cavity. Optics Express, 34(11), 20611. https://doi.org/10.1364/oe.598993

Vancouver

Huang W, Shi L, Zhai L, Luo W, Wei D, Jin L, et al. Kilohertz linewidth VCSEL with an external high Q-factor intrinsic optical fiber Fabry-Pérot cavity. Optics Express. 2026;34(11):20611. doi:10.1364/oe.598993

BibTeX
@article{Huang2026,
  author = {Huang, Wenxuan and Shi, Leilei and Zhai, Lei and Luo, Weili and Wei, Da and Jin, Liyang and Li, Yujia and Zhu, Tao},
  title = {Kilohertz linewidth VCSEL with an external high Q-factor intrinsic optical fiber Fabry-Pérot cavity},
  journal = {Optics Express},
  year = {2026},
  volume = {34},
  number = {11},
  pages = {20611},
  doi = {10.1364/oe.598993}
}
Kostenlos starten →