Fast model-based optical proximity correction method for plasmonic lithography
Optics Express · 15.06.2026 · 34 (12) · 21066
DOI: 10.1364/oe.593087 ↗Kurz gefasst
Fachartikel in der Zeitschrift Optics Express, online erschienen am 01.06.2026. Verfasst von Huwen Ding und 6 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 37 Literaturangaben. Gefördert von: QM Project B - Research on Resolution Enhancement Technology for Deep Ultraviolet Band Plasmonic Imaging Lithography.
Abstract (Originalsprache)
Plasmonic lithography has the characteristic of breaking through the diffraction limit, but it is not a “perfect imaging”, that is, it cannot perfectly restore the information of the “object” (mask pattern), and there is an optical proximity effect similar to that in projection lithography. Therefore, it is necessary to optimize the mask pattern by using plasmonic lithography optical proximity correction (OPC) technology to achieve the purpose of reducing the pattern error (PE) and improving the imaging fidelity. This paper proposes a fast model-based OPC method for plasmonic lithography. This method is based on the imaging model established by the improved rigorous coupled wave analysis (RCWA) method, and the optimization process is based on the movement of edges. Based on the edge placement error (EPE) in the previous iteration, the movement of the edge fragments in the next iteration is determined. This feedback closed loop enables OPC to gradually approach the target, and it can converge quickly in about 7 iterations. The simulation experiments show that about 7 iterations can achieve an average reduction of about 76% in the sum of the absolute values of EPE sum_|EPE| and 71% in PE. And for patterns with different line width sizes, the OPC method proposed in this paper has good compatibility. The above results effectively verify the efficiency and effectiveness of the OPC method proposed in this paper.
Förderung
- QM Project B - Research on Resolution Enhancement Technology for Deep Ultraviolet Band Plasmonic Imaging Lithography
Zitieren
APA
Ding, H., Ma, L., Su, Y., Ren, P., Rui, D., Xing, Z., & Wei, Y. (2026). Fast model-based optical proximity correction method for plasmonic lithography. Optics Express, 34(12), 21066. https://doi.org/10.1364/oe.593087
Vancouver
Ding H, Ma L, Su Y, Ren P, Rui D, Xing Z, et al. Fast model-based optical proximity correction method for plasmonic lithography. Optics Express. 2026;34(12):21066. doi:10.1364/oe.593087
BibTeX
@article{Ding2026,
author = {Ding, Huwen and Ma, Le and Su, Yajuan and Ren, Pengyu and Rui, Dinghai and Xing, Zhenyu and Wei, Yayi},
title = {Fast model-based optical proximity correction method for plasmonic lithography},
journal = {Optics Express},
year = {2026},
volume = {34},
number = {12},
pages = {21066},
doi = {10.1364/oe.593087}
}
EUVIMED