EUVIMEDEUVIMED entdecken
Crossref

Multi-step overlap path for suppressing mid-spatial frequency error in bonnet polishing

Xuepeng Huang, Zhenzhong Wang, Maoyuan Li, Feng Lu, Xin Zhuo

Optics Express · 01.12.2025 · 33 (24) · 50304

DOI: 10.1364/oe.580274 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Optics Express, online erschienen am 18.11.2025. Verfasst von Xuepeng Huang und 4 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 26 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Fujian Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Bonnet polishing has been extensively applied in the fabrication of optical components due to its high material removal efficiency and superior surface-shaping capability. However, the conventional raster polishing path inevitably introduces mid-spatial frequency (MSF) error. To address this issue, the influence mechanism of the tool influence function (TIF) and the azimuthal angle of the feed direction on MSF error were investigated. Based on the principle of uniformly distributing MSF error, a multi-step overlap path strategy was proposed, and its feasibility was validated through numerical simulations. Subsequently, polishing experiments were conducted to further validate the effectiveness of the method. After figuring, the peak power spectral density (PSD) at the polishing interval of the traditional raster path was 1160.44 nm 2 ·mm, whereas that of the proposed multi-step overlap path was reduced to 235.6 nm 2 ·mm, demonstrating a remarkable suppression of MSF error. These findings suggest that optimizing the azimuthal feed angle and employing a multi-step overlap path provide an effective approach for reducing MSF error in optical component manufacturing.

Förderung

  • National Natural Science Foundation of China
  • Natural Science Foundation of Fujian Province

Zitieren

APA

Huang, X., Wang, Z., Li, M., Lu, F., & Zhuo, X. (2025). Multi-step overlap path for suppressing mid-spatial frequency error in bonnet polishing. Optics Express, 33(24), 50304. https://doi.org/10.1364/oe.580274

Vancouver

Huang X, Wang Z, Li M, Lu F, Zhuo X. Multi-step overlap path for suppressing mid-spatial frequency error in bonnet polishing. Optics Express. 2025;33(24):50304. doi:10.1364/oe.580274

BibTeX
@article{Huang2025,
  author = {Huang, Xuepeng and Wang, Zhenzhong and Li, Maoyuan and Lu, Feng and Zhuo, Xin},
  title = {Multi-step overlap path for suppressing mid-spatial frequency error in bonnet polishing},
  journal = {Optics Express},
  year = {2025},
  volume = {33},
  number = {24},
  pages = {50304},
  doi = {10.1364/oe.580274}
}
Kostenlos starten →