Density adaptive path based on stacked rotation convolution model in ultra-precision robotic optical polishing
Optics Express · 18.11.2024 · 32 (24) · 42767
DOI: 10.1364/oe.539244 ↗Kurz gefasst
Fachartikel in der Zeitschrift Optics Express, online erschienen am 07.11.2024. Verfasst von Hanjie Li und 13 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 32 Literaturangaben. Gefördert von: Strategic Priority Research Program of the Chinese Academy of Sciences, Natural Science Foundation of Shanghai, National Natural Science Youth Foundation of China.
Abstract (Originalsprache)
Deterministic optics fabrication using sub-aperture tools has been vital for manufacturing precision optical surfaces, industrial robotic polishing, which is a more economical and intelligent method is required in modern fabrication process. However, the challenge of robotic polishing lies in the widely used spiral and raster paths, which may leave excess waviness from the tool path, and the unavoidable constant removal layer is added to obtain positive dwell time which cause low polishing accuracy. The waviness can be removed by either using smoothing tools sequentially or randomizing the tool path. However, process efficiency and accuracy are not well considered in the existing tool-path planning. A density adaptive path based on a stacked rotation convolution model to ensure polishing accuracy and efficiency while avoiding waviness generation is proposed in this study, and then the dwell time is calculated by anti-aliasing space-variant deconvolution. The robotic polisher experimental results confirm that the root mean square (RMS) of the final surface figure has been successfully reduced and stabilized at 7.355 nm, and the convergence effect at unit wavelength has been significantly augmented with an improvement of 367%, reducing the measurement from 28% to 131%; in addition, no obvious mid-spatial frequency (MSF) peak was generated in the PSD analysis of density adaptive path polishing results. Henceforth, the polishing accuracy, efficiency, and MSF error of robotic polishing can be greatly enhanced.
Förderung
- Strategic Priority Research Program of the Chinese Academy of Sciences
- Natural Science Foundation of Shanghai
- National Natural Science Youth Foundation of China
- National Key Research and Development Program of China
- Youth Innovation Promotion Association of the Chinese Academy of Sciences
Zitieren
APA
Li, H., Wan, S., Yan, S., Zhang, L., Han, Y., Li, Z., Wang, L., Niu, Z., Hu, C., Jiang, G., Cao, Z., Zhang, Y., Wei, C., & Shao, J. (2024). Density adaptive path based on stacked rotation convolution model in ultra-precision robotic optical polishing. Optics Express, 32(24), 42767. https://doi.org/10.1364/oe.539244
Vancouver
Li H, Wan S, Yan S, Zhang L, Han Y, Li Z, et al. Density adaptive path based on stacked rotation convolution model in ultra-precision robotic optical polishing. Optics Express. 2024;32(24):42767. doi:10.1364/oe.539244
BibTeX
@article{Li2024,
author = {Li, Hanjie and Wan, Songlin and Yan, Shuo and Zhang, Lanya and Han, Yichi and Li, Zheng and Wang, Lin and Niu, Zhenqi and Hu, Chen and Jiang, Guochang and Cao, Zhen and Zhang, Yifan and Wei, Chaoyang and Shao, Jianda},
title = {Density adaptive path based on stacked rotation convolution model in ultra-precision robotic optical polishing},
journal = {Optics Express},
year = {2024},
volume = {32},
number = {24},
pages = {42767},
doi = {10.1364/oe.539244}
}
EUVIMED