Arc discharge method to fabricate large concave structures for open-access fiber Fabry-Pérot cavities
Optics Express · 29.01.2024 · 32 (3) · 2906
DOI: 10.1364/oe.501532 ↗Kurz gefasst
Fachartikel in der Zeitschrift Optics Express, online erschienen am 16.01.2024. Verfasst von Ding Fang und 8 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 40 Literaturangaben. Gefördert von: Innovation Program for Quantum Science and Technology, Key Research Program of Frontier Science, Chinese Academy of Sciences, Chinese Academy of Sciences.
Abstract (Originalsprache)
We present a novel micro-fabrication technique for creating concave surfaces on the endfacets of photonic crystal fibers. A fiber fusion splicer is used to generate arc discharges to melt and reshape the fiber endfacet. This technique can produce large spherical concave surfaces with roughness as low as 0.12 nm in various types of photonic crystal fibers. The deviation of fabricated surface and a spherical profile in the region of 70 µ m in diameter is less than 50 nm. The center of the concave surface and the fiber mode field are highly coincident with a deviation less than 500 nm. Finesse measurements have shown that a Fabry-Pérot cavity composed of the fiber fabricated using this method and a plane mirror maintains finesse of 20000. This method is easy to replicate, making it a practical and efficient approach to fabricate concave surface on fibers for open-access fiber Fabry-Pérot cavities.
Förderung
- Innovation Program for Quantum Science and Technology
- Key Research Program of Frontier Science, Chinese Academy of Sciences
- Chinese Academy of Sciences
- National Natural Science Foundation of China
- Fundamental Research Funds for the Central Universities
- National Key Research and Development Program of China
- Students Innovation and Entrepreneurship Foundation of USTC
Zitieren
APA
Fang, D., Cui, J. M., Chen, W. B., Chen, Y., Li, R. R., Zhang, C. H., Huang, Y. F., Li, C. F., & Guo, G. C. (2024). Arc discharge method to fabricate large concave structures for open-access fiber Fabry-Pérot cavities. Optics Express, 32(3), 2906. https://doi.org/10.1364/oe.501532
Vancouver
Fang D, Cui JM, Chen WB, Chen Y, Li RR, Zhang CH, et al. Arc discharge method to fabricate large concave structures for open-access fiber Fabry-Pérot cavities. Optics Express. 2024;32(3):2906. doi:10.1364/oe.501532
BibTeX
@article{Fang2024,
author = {Fang, Ding and Cui, Jin-Ming and Chen, Wei-Bin and Chen, Yan and Li, Rui-Rui and Zhang, Cheng-Hao and Huang, Yun-Feng and Li, Chuan-Feng and Guo, Guang-Can},
title = {Arc discharge method to fabricate large concave structures for open-access fiber Fabry-Pérot cavities},
journal = {Optics Express},
year = {2024},
volume = {32},
number = {3},
pages = {2906},
doi = {10.1364/oe.501532}
}
EUVIMED