Manufacturable blazed metasurface gratings designed by a 3D topology optimization model
Journal of the Optical Society of America A · 01.09.2026 · 43 (9) · 1435
DOI: 10.1364/josaa.601840 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of the Optical Society of America A, online erschienen am 14.08.2026. Verfasst von Simon Ans und 2 weiteren Autor:innen. Die Arbeit nennt 39 Literaturangaben.
Abstract (Originalsprache)
We present an open-source finite element method-based topology optimization framework for 3D blazed metasurfaces operating in reflection over the [400–1500] nm visible and near-infrared range. The design region is described through a density-based interpolation and optimized using the adjoint method, enabling the treatment of several tens of thousands of degrees of freedom. A first approach directly applies topology optimization to the 3D finite element mesh (mesh-based), yielding a freeform structure that achieves an average diffraction efficiency of 62% in the −1st order over two octaves under the targeted incidence. However, the freeform patterns obtained remain difficult to manufacture. We therefore introduce a pillar-based parameterization, embedding fabrication constraints within the optimization loop. The resulting binary metasurface, compatible with e-beam lithography and reactive ion etching techniques, achieves an average efficiency of 57% over the same spectral band in p -polarization, with low polarization dependence. This work demonstrates that large-scale 3D topology optimization can bridge the gap between broadband optical performance and realistic nanofabrication constraints for blazed metasurfaces.
Zitieren
APA
Ans, S., Zamkotsian, F., & Demésy, G. (2026). Manufacturable blazed metasurface gratings designed by a 3D topology optimization model. Journal of the Optical Society of America A, 43(9), 1435. https://doi.org/10.1364/josaa.601840
Vancouver
Ans S, Zamkotsian F, Demésy G. Manufacturable blazed metasurface gratings designed by a 3D topology optimization model. Journal of the Optical Society of America A. 2026;43(9):1435. doi:10.1364/josaa.601840
BibTeX
@article{Ans2026,
author = {Ans, Simon and Zamkotsian, Frédéric and Demésy, Guillaume},
title = {Manufacturable blazed metasurface gratings designed by a 3D topology optimization model},
journal = {Journal of the Optical Society of America A},
year = {2026},
volume = {43},
number = {9},
pages = {1435},
doi = {10.1364/josaa.601840}
}
EUVIMED