EUVIMEDEUVIMED entdecken
Crossref

Surface contouring of reflective and diffuse samples using dual-angle digital holographic shear interferometry

Sevda Mamaghani iD, Konstantinos Falaggis iD

Applied Optics · 10.11.2026 · 65 (32) · 11283

DOI: 10.1364/ao.618152 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Optics, online erschienen am 02.11.2026. Verfasst von Sevda Mamaghani und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering and Engineering Sciences, University of North Carolina at Charlotte, Charlotte, North Carolina 28223, USA. Die Arbeit nennt 38 Literaturangaben. Gefördert von: University of North Carolina at Charlotte.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this work, a grating-based dual-angle digital holographic shear interferometry system is presented for generating synthetic wavelengths and extending the measurable height range. A geometric-phase (GP) grating and mirror configuration generates laterally sheared wavefronts at multiple shear orientations, while a polarization camera enables simultaneous phase-shifted intensity acquisition. Measurements are performed at two illumination angles, and the reconstructed complex wavefields are combined to obtain a synthetic phase distribution whose sensitivity is determined by the angular separation between the two measurements. The system was experimentally evaluated using standard step-height artifacts and surface features on both reflective and diffuse samples. Step-height measurements demonstrated the dependence of measurement performance on the selected synthetic wavelength. An analytical uncertainty analysis identified the illumination angle as a significant contributor to the overall measurement uncertainty, emphasizing the importance of system calibration using a standard artifact. Temporal repeatability was also evaluated through repeated measurements. The results demonstrate the capability of grating-based dual-angle digital holographic shear interferometry for quantitative three-dimensional surface reconstruction while maintaining a compact common-path configuration.

Autor:innen und Institutionen

  • Department of Mechanical Engineering and Engineering Sciences, University of North Carolina at Charlotte, Charlotte, North Carolina 28223, USA.

ORCID-Profile: Sevda Mamaghani, Konstantinos Falaggis

Förderung

  • University of North Carolina at Charlotte

Zitieren

APA

Mamaghani, S., & Falaggis, K. (2026). Surface contouring of reflective and diffuse samples using dual-angle digital holographic shear interferometry. Applied Optics, 65(32), 11283. https://doi.org/10.1364/ao.618152

Vancouver

Mamaghani S, Falaggis K. Surface contouring of reflective and diffuse samples using dual-angle digital holographic shear interferometry. Applied Optics. 2026;65(32):11283. doi:10.1364/ao.618152

BibTeX
@article{Mamaghani2026,
  author = {Mamaghani, Sevda and Falaggis, Konstantinos},
  title = {Surface contouring of reflective and diffuse samples using dual-angle digital holographic shear interferometry},
  journal = {Applied Optics},
  year = {2026},
  volume = {65},
  number = {32},
  pages = {11283},
  doi = {10.1364/ao.618152}
}
Kostenlos starten →