EUVIMEDEUVIMED entdecken
Crossref

4 + 1-axis simultaneous variable-feedrate spiral grinding and on-machine measurement for large-diameter optical surfaces

Xiabin Ji, Guoyan Sun, Quanli Zhang, Jiaoteng Ding, Yang Wu, Yucan Fu

Applied Optics · 20.11.2026 · 65 (33) · 11733

DOI: 10.1364/ao.616173 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Optics, online erschienen am 11.11.2026. Verfasst von Xiabin Ji und 5 weiteren Autor:innen. Die Arbeit nennt 15 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Shaanxi Science and Technology Department.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Large-diameter optical surfaces present significant challenges for grinding, owing to their stringent precision requirements and long processing cycle. This paper proposes a 4+1-axis simultaneous variable-feedrate spiral grinding and on-machine measurement method for large-diameter optical surfaces. The main technical contributions of this work are outlined below. Taking the most common aspheric surface in optical systems as an example, tool path points are directly derived from the standard aspheric equation. First, a hybrid adaptive spiral discretization strategy that employs equal arc-length steps in the peripheral region and equal angular steps in the central region is developed to balance the distribution density of trajectory points between the edge and center. Second, a C-axis variable-feedrate linear interpolation strategy is introduced to simultaneously improve machining efficiency and surface consistency. Third, to facilitate engineering implementation on large-scale five-axis machine tools, a postprocessing model tailored to the vertical L-shaped swing-arm spindle configuration is constructed. An on-machine measurement system incorporating a Renishaw probe is built, and the ball-end probe radius compensation error is analyzed by fitting surface normal vectors from the acquired raw data. Experiments are conducted on a Φ860mm JGS1 convex high-order coaxial asphere and a Φ630mm glass-ceramic concave off-axis asphere. The on-machine measured form error (PV) after fine grinding is 0.015 and 0.017 mm, respectively, agreeing with the CMM remeasurement results to within 0.001 mm; the surface roughness distribution is reasonably uniform. This research provides a practical approach for the efficient precision grinding of large-diameter complex optical surfaces.

Förderung

  • National Natural Science Foundation of China
  • Shaanxi Science and Technology Department

Zitieren

APA

Ji, X., Sun, G., Zhang, Q., Ding, J., Wu, Y., & Fu, Y. (2026). 4 + 1-axis simultaneous variable-feedrate spiral grinding and on-machine measurement for large-diameter optical surfaces. Applied Optics, 65(33), 11733. https://doi.org/10.1364/ao.616173

Vancouver

Ji X, Sun G, Zhang Q, Ding J, Wu Y, Fu Y. 4 + 1-axis simultaneous variable-feedrate spiral grinding and on-machine measurement for large-diameter optical surfaces. Applied Optics. 2026;65(33):11733. doi:10.1364/ao.616173

BibTeX
@article{Ji2026,
  author = {Ji, Xiabin and Sun, Guoyan and Zhang, Quanli and Ding, Jiaoteng and Wu, Yang and Fu, Yucan},
  title = {4 + 1-axis simultaneous variable-feedrate spiral grinding and on-machine measurement for large-diameter optical surfaces},
  journal = {Applied Optics},
  year = {2026},
  volume = {65},
  number = {33},
  pages = {11733},
  doi = {10.1364/ao.616173}
}
Kostenlos starten →