Tangential-sagittal decomposition-combination design method for a large-field anamorphic extreme ultraviolet lithography projection objective
Applied Optics · 10.11.2026 · 65 (32) · 11352
DOI: 10.1364/ao.613136 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Optics, online erschienen am 03.11.2026. Verfasst von Yanbei Nan und 2 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of Photoelectronic Imaging Technology and System of Ministry of Education of China, School of Optics and Photonics,Beijing Institute o…. Die Arbeit nennt 12 Literaturangaben. Gefördert von: National Natural Science Foundation of China, National Science and Technology Major Project of China.
Abstract (Originalsprache)
Extreme ultraviolet lithography (EUVL) for 2 nm and below node is impacted by the projection objective performance. Anamorphic projection objectives have been employed for high-numerical aperture (NA=0.55) EUVL systems. Existing design methods for anamorphic projection objectives construct initial structures from coaxial subsystems and have been demonstrated for relatively small fields of view. The freeform surfaces during optimization have not matched the optical characteristics of anamorphic systems. A novel tangential-sagittal decomposition-combination (TSDC) design method, to our knowledge, is proposed for an anamorphic initial structure. By adopting an anamorphic XY polynomial freeform surface during optimization, the final system has a root mean square wavefront error of less than 0.92 nm and a maximum distortion of less than 0.48 nm. Its image-side field of view reaches 26mm×1mm, doubling the field width reported in previous studies.
Autor:innen und Institutionen
- Key Laboratory of Photoelectronic Imaging Technology and System of Ministry of Education of China, School of Optics and Photonics,Beijing Institute of Technology, Beijing 100081, China.
Förderung
- National Natural Science Foundation of China
- National Science and Technology Major Project of China
Zitieren
APA
Nan, Y., Zhang, Z., & Li, Y. (2026). Tangential-sagittal decomposition-combination design method for a large-field anamorphic extreme ultraviolet lithography projection objective. Applied Optics, 65(32), 11352. https://doi.org/10.1364/ao.613136
Vancouver
Nan Y, Zhang Z, Li Y. Tangential-sagittal decomposition-combination design method for a large-field anamorphic extreme ultraviolet lithography projection objective. Applied Optics. 2026;65(32):11352. doi:10.1364/ao.613136
BibTeX
@article{Nan2026,
author = {Nan, Yanbei and Zhang, Zhenkun and Li, Yanqiu},
title = {Tangential-sagittal decomposition-combination design method for a large-field anamorphic extreme ultraviolet lithography projection objective},
journal = {Applied Optics},
year = {2026},
volume = {65},
number = {32},
pages = {11352},
doi = {10.1364/ao.613136}
}
EUVIMED