EUVIMEDEUVIMED entdecken
Crossref

Design and development of a single-material high-throughput objective for ultraviolet–visible imaging

Yaojun Fang iD, Zhicheng Zhao, Jiacheng Zhu iD, Weimin Shen

Applied Optics · 10.11.2026 · 65 (32) · 11434

DOI: 10.1364/ao.612500 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Optics, online erschienen am 04.11.2026. Verfasst von Yaojun Fang und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Optoelectronic Science and Engineering, Soochow University, Suzhou 215100, China. Die Arbeit nennt 20 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

High-throughput microscopic imaging is essential for applications such as gene sequencing and semiconductor inspection. The requirements for high numerical aperture (NA) and ultraviolet broadband performance introduce substantial challenges in controlling spherical aberration and chromatic aberration. To address these challenges, this study proposes and fabricates a single-material high-throughput catadioptric objective that offers high NA, a wide field of view (FOV), and a wide wavelength range. Through ray tracing and numerical analysis, conditions for aberration correction and apochromatism are derived, and a computational model for the initial structure of this catadioptric objective is established. Based on this model, a broadband objective (0.360–0.600 µm, 0.9 NA, 5.0 mm focal length, and 1.0 mm FOV) is designed, and only fused silica is used. An objective prototype is developed and tested. The results show that the root mean square (RMS) of the wavefront error is below 0.068 λ at 0.365 µm test wavelength across the whole FOV. The objective achieves a high resolution of 3300 lp/mm, field curvature less than 150 nm, and relative distortion below 0.08%. Chromatic aberration is effectively controlled, and imaging quality approaches the diffraction limit. These results confirm the validity of the proposed aberration correction conditions and the initial-structure model. This work establishes a systematic technical approach for developing high-NA, broadband, and non-immersion microscope objectives.

Autor:innen und Institutionen

  • School of Optoelectronic Science and Engineering, Soochow University, Suzhou 215100, China.
  • Jiangsu Key Laboratory of Flexible Optoelectronics and Micro-Nano Manufacturing, Suzhou, China.
  • Collaborative Innovation Center of Suzhou Nano Science and Technology, Suzhou, China.

ORCID-Profile: Yaojun Fang, Jiacheng Zhu

Zitieren

APA

Fang, Y., Zhao, Z., Zhu, J., & Shen, W. (2026). Design and development of a single-material high-throughput objective for ultraviolet–visible imaging. Applied Optics, 65(32), 11434. https://doi.org/10.1364/ao.612500

Vancouver

Fang Y, Zhao Z, Zhu J, Shen W. Design and development of a single-material high-throughput objective for ultraviolet–visible imaging. Applied Optics. 2026;65(32):11434. doi:10.1364/ao.612500

BibTeX
@article{Fang2026,
  author = {Fang, Yaojun and Zhao, Zhicheng and Zhu, Jiacheng and Shen, Weimin},
  title = {Design and development of a single-material high-throughput objective for ultraviolet–visible imaging},
  journal = {Applied Optics},
  year = {2026},
  volume = {65},
  number = {32},
  pages = {11434},
  doi = {10.1364/ao.612500}
}
Kostenlos starten →