Lissajous figure-based moiré fringe lithography alignment method for small marks
Applied Optics · 10.07.2026 · 65 (20) · 6989
DOI: 10.1364/ao.599669 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Optics, online erschienen am 10.07.2026. Verfasst von Wentao Luo und 4 weiteren Autor:innen. Die Arbeit nennt 23 Literaturangaben. Gefördert von: Chinese Academy of Sciences, Frontier Research Fund of Institute of Optics and Electronics, China Academy of Sciences, Sichuan Science and Technology Program.
Abstract (Originalsprache)
In lithography alignment technology, reducing the size of alignment marks is necessary to increase the effective area of the wafer. Moiré fringes are commonly employed in alignment techniques, and the phase difference is typically extracted from these fringes using Fourier transform methods. To control production costs, alignment marks are typically reduced by decreasing the number of grating structures, which also leads to a reduction in the number of moiré fringes. When processing moiré fringe signals using the Fourier transform method, an insufficient number of moiré fringes causes issues such as spectral overlap, thereby limiting further reduction of the alignment marks. The ellipse fitting method based on a Lissajous figure is often used to obtain the phase difference between two sets of periodic signals with identical frequencies, which is consistent with the moiré fringe alignment approach. In this method, two periodic signals with the same frequency are fed into orthogonal coordinate axes, and the phase difference is obtained based on the geometric parameters of the resulting pattern. Consequently, when the number of moiré fringes decreases, the Lissajous ellipse fitting method avoids principle errors such as spectral overlap encountered in Fourier transform methods, making it more suitable for alignment measurements with small marks. In this work, two sets of alignment marks with different sizes were designed to generate varying numbers of moiré fringes. The advantages of the Lissajous ellipse fitting method for moiré fringe alignment in the context of small marks are demonstrated via experiments.
Förderung
- Chinese Academy of Sciences
- Frontier Research Fund of Institute of Optics and Electronics, China Academy of Sciences
- Sichuan Science and Technology Program
Zitieren
APA
Luo, W., Tang, Y., Wang, C., Long, Y., & Cheng, X. (2026). Lissajous figure-based moiré fringe lithography alignment method for small marks. Applied Optics, 65(20), 6989. https://doi.org/10.1364/ao.599669
Vancouver
Luo W, Tang Y, Wang C, Long Y, Cheng X. Lissajous figure-based moiré fringe lithography alignment method for small marks. Applied Optics. 2026;65(20):6989. doi:10.1364/ao.599669
BibTeX
@article{Luo2026,
author = {Luo, Wentao and Tang, Yan and Wang, Changtao and Long, Yuliang and Cheng, Xiaolong},
title = {Lissajous figure-based moiré fringe lithography alignment method for small marks},
journal = {Applied Optics},
year = {2026},
volume = {65},
number = {20},
pages = {6989},
doi = {10.1364/ao.599669}
}
EUVIMED