EUVIMEDEUVIMED entdecken
Crossref

Characterization of an open-source quadscope (camera view splitter) design

Abinash Sahoo, Ryan D. DeBoskey, Venkateswaran Narayanaswamy

Applied Optics · 01.07.2026 · 65 (19) · 6493

DOI: 10.1364/ao.591186 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Optics, online erschienen am 24.06.2026. Verfasst von Abinash Sahoo und 2 weiteren Autor:innen. Die Arbeit nennt 29 Literaturangaben. Gefördert von: United States Department of Energy.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Camera view splitters are elegant optical devices that can project multiple views of an object onto a single camera sensor, either for multi-spectral imaging or 3D computed tomography. Casting multiple images onto the same camera dramatically reduces the system cost with fewer total cameras. With expensive commercial view splitters and limited fabrication/performance information on in-house custom-built devices, a low-cost open-source general-purpose view splitter design providing up to four views per camera (quadscope) was proposed recently. The current study conducts a detailed investigation of this design to characterize its performance while exploring avenues for improvement. Toward this, numerical simulations were initially performed based on a backward ray-tracing model with pinhole camera approximations (used in video game graphics) to understand the effects of quadscope design modalities on image distortion. Informed by the extensive numerical sensitivity analysis, experiments were performed with changes in position, orientation, and tilt angle of the optical elements (mirrors) in the quadscope view splitter and guiding mirrors. Effects of these design modifications on image distortion (tilt angles), signal-to-noise ratio (SNR) in the dot-grid images, and pixel area loss percentage (unused pixel area fraction on the camera sensor) are discussed in detail. In addition to the changes in quadscope design parameters, experiments by varying imaging parameters such as object distance and focal length of the camera lens were also performed. The observed results led to the design and testing of a modified quadscope with minimal image distortion (near-zero tilt angles), which made the quadscope views compact and optimally used the camera’s sensor area. Inherently higher parallax angles make this design more suitable for computed tomography.

Förderung

  • United States Department of Energy

Zitieren

APA

Sahoo, A., DeBoskey, R. D., & Narayanaswamy, V. (2026). Characterization of an open-source quadscope (camera view splitter) design. Applied Optics, 65(19), 6493. https://doi.org/10.1364/ao.591186

Vancouver

Sahoo A, DeBoskey RD, Narayanaswamy V. Characterization of an open-source quadscope (camera view splitter) design. Applied Optics. 2026;65(19):6493. doi:10.1364/ao.591186

BibTeX
@article{Sahoo2026,
  author = {Sahoo, Abinash and DeBoskey, Ryan D. and Narayanaswamy, Venkateswaran},
  title = {Characterization of an open-source quadscope (camera view splitter) design},
  journal = {Applied Optics},
  year = {2026},
  volume = {65},
  number = {19},
  pages = {6493},
  doi = {10.1364/ao.591186}
}
Kostenlos starten →