Effect of Water Temperature and Salinity on the Jet Erosion Test (JET) Discharge Coefficient
Journal of Natural Resources and Agricultural Ecosystems · 2024 · 2 (1) · 29-37
DOI: 10.13031/jnrae.15337 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Natural Resources and Agricultural Ecosystems, 2024. Verfasst von Joanna Quiah und 4 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref). Gefördert von: NSF.
Abstract (Originalsprache)
Highlights The JET discharge coefficient C d was negatively correlated to water temperature and positively correlated to salinity. The impact of water temperature was more significant than that of salinity, especially at lower temperatures. Increasing water temperatures reduced C d by as much as 20% per 10°C increment. Low levels of salinity initially increased C d , but its magnitude remained relatively constant for levels greater than 5 ppt. Abstract. The discharge coefficient (C d ) of the Jet Erosion Test (JET) directly affects the calculation of applied shear stresses (t o ) during testing and, therefore, of JET-derived erodibility parameters, namely, the soil’s critical shear stress (t c ) and erodibility coefficient (k d ). Typically, C d is assumed to be constant for a given combination of JET device (e.g., original vs. mini) and setup (e.g., head tank vs. pressure gage), disregarding the effects of varying environmental conditions. The objective of this study was to quantify the impact of changing water temperature and salinity on the C d of a mini-JET device fed by a pressure head tank. Laboratory experiments were conducted to determine the variability in C d for ranges of water temperature between 10 and 30°C and salinity between 0 and 35 ppt. Results showed that C d was sensitive to changes in both variables, with water temperature generating a more significant impact. C d was negatively correlated to water temperature, decreasing by as much as 20% when temperature increased from 10 to 20°C, and positively correlated to salinity, increasing at low levels but remaining relatively constant for levels greater than 5 ppt. When extrapolated to erosion curves and JET-derived erodibility parameters, the variability in C d significantly impacted the calculation of t o and the magnitude of t c and k d , highlighting the degree of uncertainty that could be associated with these variables because of an uncalibrated C d . Lastly, results from the laboratory experiments were used to develop a normalized predictive model and associated curves for application to other mini-JET devices with similar setups. Keywords: Discharge Coefficient, Erodibility, Jet Erosion Test, Salinity, Temperature.
Förderung
- NSF
Zitieren
APA
Quiah, J., Bolinaga, C. C., Hall, S. G., Fox, G. A., & Stark, N. (2024). Effect of Water Temperature and Salinity on the Jet Erosion Test (JET) Discharge Coefficient. Journal of Natural Resources and Agricultural Ecosystems, 2(1), 29-37. https://doi.org/10.13031/jnrae.15337
Vancouver
Quiah J, Bolinaga CC, Hall SG, Fox GA, Stark N. Effect of Water Temperature and Salinity on the Jet Erosion Test (JET) Discharge Coefficient. Journal of Natural Resources and Agricultural Ecosystems. 2024;2(1):29-37. doi:10.13031/jnrae.15337
BibTeX
@article{Quiah2024,
author = {Quiah, Joanna and Bolinaga, Celso Castro and Hall, Steven G. and Fox, Garey A. and Stark, Nina},
title = {Effect of Water Temperature and Salinity on the Jet Erosion Test (JET) Discharge Coefficient},
journal = {Journal of Natural Resources and Agricultural Ecosystems},
year = {2024},
volume = {2},
number = {1},
pages = {29--37},
doi = {10.13031/jnrae.15337}
}
EUVIMED