EUVIMEDEUVIMED entdecken
Crossref

Improved Prediction Model for Maximum Static Friction Force of Agricultural Tractor with Front-End Loader on Paved Road

Kwang-Mo Kim, Dong-Hyeon Gim, Jeong-Hun Kim, Ju-Seok Nam

Journal of Agricultural Safety and Health · 2025

DOI: 10.13031/jash.16100 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Agricultural Safety and Health, 2025. Verfasst von Kwang-Mo Kim und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Biosystems Engineering, Kangwon National University, Chuncheon, Gangwon-do, South Korea. Hauptthemen laut MEDLINE: Safety, Agriculture, Motor Vehicles.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Highlights The friction force is one of the important influence factors on tire slip, overturning, and rollover characteristics of tractors. The maximum static friction forces of three different tractors were measured on paved roads under various loading conditions. The prediction models of the previous study were improved through regression analysis for the measured data. The model that uses the front and rear axle’s reaction forces as variables showed the highest prediction accuracy. Abstract. The overturning and rollover safety of a tractor located on a slope is decreased by tire slip, which is affected by static friction force. Existing regression models for predicting the static friction force of tractors demonstrate inadequate accuracy, necessitating further refinement. Therefore, this study was conducted to improve the accuracy of the maximum static friction force prediction model developed in a previous study for tractors with a front-end loader. As a result of measuring the maximum static friction, it tended to increase as the rear ballast weight increased and to decrease as the payload increased. The accuracy of the regression models in this study was significantly improved compared to that in previous studies. The regression model that used the reaction forces of the front and rear axles as variables exhibited the highest accuracy, followed by the model using the rear axle reaction only. The reaction force of the rear axle had a greater effect on the maximum static friction than that of the front axle. The developed regression model will predict the maximum static friction force of a tractor with a front-end loader on paved roads with high accuracy using the reaction forces of the front and rear axles. Future studies will focus on extending these predictions to various soil types and under dynamic conditions. Keywords: Agricultural tractor, Front-end loader, Maximum static friction force, Regression analysis, Regression model, Tire slip.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

SafetyAgricultureMotor VehiclesRegression AnalysisEquipment DesignModels, TheoreticalFriction

Stichwörter der Autor:innen

Agricultural tractorFront-end loaderMaximum static friction forceRegression analysisRegression modelTire slip

Autor:innen und Institutionen

  • Department of Biosystems Engineering, Kangwon National University, Chuncheon, Gangwon-do, South Korea.
  • Interdisciplinary Program in Smart Agriculture, Kangwon National University, Chuncheon, Gangwon-do, South Korea.
  • CAE Solution, TYM, Gongju, Chungcheongnam-do, South Korea.

Zitieren

APA

Kim, K. M., Gim, D. H., Kim, J. H., & Nam, J. S. (2025). Improved Prediction Model for Maximum Static Friction Force of Agricultural Tractor with Front-End Loader on Paved Road. Journal of Agricultural Safety and Health. https://doi.org/10.13031/jash.16100

Vancouver

Kim KM, Gim DH, Kim JH, Nam JS. Improved Prediction Model for Maximum Static Friction Force of Agricultural Tractor with Front-End Loader on Paved Road. Journal of Agricultural Safety and Health. 2025. doi:10.13031/jash.16100

BibTeX
@article{Kim2025,
  author = {Kim, Kwang-Mo and Gim, Dong-Hyeon and Kim, Jeong-Hun and Nam, Ju-Seok},
  title = {Improved Prediction Model for Maximum Static Friction Force of Agricultural Tractor with Front-End Loader on Paved Road},
  journal = {Journal of Agricultural Safety and Health},
  year = {2025},
  doi = {10.13031/jash.16100}
}
Kostenlos starten →