EUVIMEDEUVIMED entdecken
Crossref

Separating Corn Stover into Anatomical Fractions to Reduce Pretreatment Severity

Zachery Kluge, Kevin J. Shinners, Aaron J. Timm, Matthew F. Digman

Journal of the ASABE · 2026 · 69 (3) · 461-471

DOI: 10.13031/ja.16500 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of the ASABE, 2026. Verfasst von Zachery Kluge und 3 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Highlights Mechanical screening and air classification were used to separate corn stover into two anatomical groups. Post-separation purity of the cobs/leaves group was 90.2%, but only 53.9% of targeted anatomical mass was captured. Post-separation purity of the stalks/husks group was 72.7%, capturing 83.1% of the targeted anatomical mass. Separating cobs and stalks was difficult due to their similar physical properties. ABSTRACT. Corn stover is a widely available agricultural residue with significant potential as a feedstock for cellulosic biofuel and bioproduct production. However, challenges related to material heterogeneity and high pretreatment costs limit its widespread use. Anatomical fractions of corn stover—such as cobs, husks, stalks, and leaves—exhibit distinct chemical and physical properties that influence their suitability for conversion processes. Tailoring pretreatment strategies to specific fractions has previously been shown to reduce severity and increase conversion efficiency. This study evaluated systems for fractionating single-pass harvested corn stover into distinct anatomical groups, enabling targeted bioconversion pathways. Two final composite stover groups were targeted: cobs/leaves/fines and husks/stalks. Two primary processing approaches were investigated: a modified combine harvester separation and cleaning system and a rotary trommel screen followed by secondary air classification, size reduction mechanisms, and mechanical screening. The combine harvester system achieved grain separation with 98.7% purity and less than 1.5% stover contamination, but stover anatomical fractionation remained partial. After trommel screening, air classification and additional screening were required to achieve effective physical separation. Drying and crushing the large cob segments to alter their size and shape was necessary to facilitate separation from large stalk segments when screened. The final fractions, created by combining individual components into targeted composite streams of cobs/leaves/fines and husks/stalks, achieved purities of 90.2% and 72.7%, respectively. However, only 53.9% of the total cob/leaf/fines material was recovered in its corresponding final composite. While mechanical sieving and air classification proved effective, the process involved numerous operational steps whose costs must be carefully weighed against the potential pretreatment savings. Keywords: Air classification, Corn, Fractionation, Pretreatment, Sieving, Stover.

Zitieren

APA

Kluge, Z., Shinners, K. J., Timm, A. J., & Digman, M. F. (2026). Separating Corn Stover into Anatomical Fractions to Reduce Pretreatment Severity. Journal of the ASABE, 69(3), 461-471. https://doi.org/10.13031/ja.16500

Vancouver

Kluge Z, Shinners KJ, Timm AJ, Digman MF. Separating Corn Stover into Anatomical Fractions to Reduce Pretreatment Severity. Journal of the ASABE. 2026;69(3):461-471. doi:10.13031/ja.16500

BibTeX
@article{Kluge2026,
  author = {Kluge, Zachery and Shinners, Kevin J. and Timm, Aaron J. and Digman, Matthew F.},
  title = {Separating Corn Stover into Anatomical Fractions to Reduce Pretreatment Severity},
  journal = {Journal of the ASABE},
  year = {2026},
  volume = {69},
  number = {3},
  pages = {461--471},
  doi = {10.13031/ja.16500}
}
Kostenlos starten →