EUVIMEDEUVIMED entdecken
Crossref

Effect of Various Roughness Parameters on Surface Wettability of 3Y-TZP Ceramic

Ornnicha Thanatvarakorn, Taweesak Prasansuttiporn, Thanapat Sastraruji, Keiichi Hosaka, Kittisak Sanon, Junji Tagami

Oral Sciences Reports · 28.05.2026 · 47 (2) · 251-258

DOI: 10.12982/osr.2026.027 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Oral Sciences Reports, online erschienen am 28.05.2026. Verfasst von Ornnicha Thanatvarakorn und 5 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Objectives

The surface wettability of zirconia has been reported to correlate with the roughness. However, most studies commonly used the arithmetical mean deviation of the roughness (Sa) to predict surface wettability. It is of interest whether other roughness parameters affect the wettability of zirconia. Thus, this study aimed to evaluate the effect of various roughness parameters on the surface wettability of 3Y-TZP.

Methods

Zirconia slabs were prepared and divided into 4 groups (n=10) based on the surface treatment as follows: no treatment (control), air abrasion (AB), etching with 48% hydrofluoric acid (HF), and etching with the mixture of 37% hydrochloric acid and 68% nitric acid (CN). The specimens were scanned using atomic force microscopy (AFM) to evaluate vertical roughness parameters (Sa, Ssk: the skewness, Sku: the kurtosis) and non-vertical roughness parameters (Rsm: the mean width of the profile elements, Sdq: the mean slope of the surface, Sdr: the rate of increase in the surface area). Wettability was determined by surface contact angle (θc) using the sessile drop technique. The data were analyzed statistically with one-way ANOVA and Tukey’s test (p0.05).

Conclusions

The Sdq and Sdr parameters could affect the surface wettability of 3Y-TZP. The higher slope of the profile and the higher surface area synergistically established better wettability of 3Y-TZP.

Zitieren

APA

Thanatvarakorn, O., Prasansuttiporn, T., Sastraruji, T., Hosaka, K., Sanon, K., & Tagami, J. (2026). Effect of Various Roughness Parameters on Surface Wettability of 3Y-TZP Ceramic. Oral Sciences Reports, 47(2), 251-258. https://doi.org/10.12982/osr.2026.027

Vancouver

Thanatvarakorn O, Prasansuttiporn T, Sastraruji T, Hosaka K, Sanon K, Tagami J. Effect of Various Roughness Parameters on Surface Wettability of 3Y-TZP Ceramic. Oral Sciences Reports. 2026;47(2):251-258. doi:10.12982/osr.2026.027

BibTeX
@article{Thanatvarakorn2026,
  author = {Thanatvarakorn, Ornnicha and Prasansuttiporn, Taweesak and Sastraruji, Thanapat and Hosaka, Keiichi and Sanon, Kittisak and Tagami, Junji},
  title = {Effect of Various Roughness Parameters on Surface Wettability of 3Y-TZP Ceramic},
  journal = {Oral Sciences Reports},
  year = {2026},
  volume = {47},
  number = {2},
  pages = {251--258},
  doi = {10.12982/osr.2026.027}
}
Kostenlos starten →