EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of tool geometry and welding parameters on shear strength and microstructural characteristics of AA6061-T6/PMMA friction stir lap joints

Lingerew Enbakom Melaku, Jacek Tomków

Advances in Science and Technology Research Journal · 01.09.2026 · 20 (9) · 424-436

DOI: 10.12913/22998624/224953 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advances in Science and Technology Research Journal, online erschienen am 01.09.2026. Verfasst von Lingerew Enbakom Melaku und 1 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Dissimilar joints between aluminum and polymer have gained significant interest in the transportation, aerospace, and marine industries due to their potential for lightweight applications. In the present study, the joint performance analysis of dissimilar material joints of AA6061-T6 aluminum alloy and poly(methyl methacrylate) (PMMA) was performed utilizing friction stir welding (FSW) in the lap joint. Shear strength testing and optical microscopy were employed to evaluate joint performance and defect formation. Joints produced using a concave shoulder tool exhibited lower thermal degradation of PMMA and improved surface quality than a flat shoulder tool. The macro-and microstructural analyses revealed joint defects such as cracks, tunnels, voids, and uneven distribution of AA6061-T6 and PMMA particles. Analysis of variance (ANOVA) revealed that rotational speed was the most influential parameter (41.16%), followed by tool geometry (34.43%) and welding speed (14.69%). The maximum shear strength of 17.8 MPa was obtained at 925 rpm and 60 mm/min using a tapered pin with a flat shoulder.

Zitieren

APA

Melaku, L. E., & Tomków, J. (2026). Effect of tool geometry and welding parameters on shear strength and microstructural characteristics of AA6061-T6/PMMA friction stir lap joints. Advances in Science and Technology Research Journal, 20(9), 424-436. https://doi.org/10.12913/22998624/224953

Vancouver

Melaku LE, Tomków J. Effect of tool geometry and welding parameters on shear strength and microstructural characteristics of AA6061-T6/PMMA friction stir lap joints. Advances in Science and Technology Research Journal. 2026;20(9):424-436. doi:10.12913/22998624/224953

BibTeX
@article{Melaku2026,
  author = {Melaku, Lingerew Enbakom and Tomków, Jacek},
  title = {Effect of tool geometry and welding parameters on shear strength and microstructural characteristics of AA6061-T6/PMMA friction stir lap joints},
  journal = {Advances in Science and Technology Research Journal},
  year = {2026},
  volume = {20},
  number = {9},
  pages = {424--436},
  doi = {10.12913/22998624/224953}
}
Kostenlos starten →