Analysis on predictive functional controller performance and tuning rule based on a first-order plus dead time model
Advances in Science and Technology Research Journal · 01.09.2026 · 20 (9) · 449-460
DOI: 10.12913/22998624/224348 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advances in Science and Technology Research Journal, online erschienen am 01.09.2026. Verfasst von Piotr Łaszczyk. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This work presents the results of both simulation and analytical investigations on tuning of predictive functional control (PFC) algorithm for first-order plus dead time (FOPDT) system. The controller’s characteristics were analyzed to determine the influence of the main control parameters on its performance. The PFC equations are transformed and an alternative surrogate parameter representing the algorithm’s effective gain was proposed. Most common control quality factors are analyzed to find a trade-off between response speed and controller aggressive - ness. Combined control quality factor was proposed and investigated to determine optimal tuning parameters. That analysis resulted in tuning formulas for main parameters of the PFC algorithm such as desired response time t rbf and prediction horizon H p . The proposed tuning approach was verified both on a higher-order dynamic system and in an experimental heating process setup.
Zitieren
APA
Łaszczyk, P. (2026). Analysis on predictive functional controller performance and tuning rule based on a first-order plus dead time model. Advances in Science and Technology Research Journal, 20(9), 449-460. https://doi.org/10.12913/22998624/224348
Vancouver
Łaszczyk P. Analysis on predictive functional controller performance and tuning rule based on a first-order plus dead time model. Advances in Science and Technology Research Journal. 2026;20(9):449-460. doi:10.12913/22998624/224348
BibTeX
@article{aszczyk2026,
author = {Łaszczyk, Piotr},
title = {Analysis on predictive functional controller performance and tuning rule based on a first-order plus dead time model},
journal = {Advances in Science and Technology Research Journal},
year = {2026},
volume = {20},
number = {9},
pages = {449--460},
doi = {10.12913/22998624/224348}
}
EUVIMED