Protective effectiveness of a nanocomposite coating with low-friction layers under sliding friction at ambient temperature
Advances in Science and Technology Research Journal · 01.07.2026 · 20 (7) · 43-53
DOI: 10.12913/22998624/218448 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advances in Science and Technology Research Journal, online erschienen am 01.07.2026. Verfasst von Marek Robert Hawryluk und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This study evaluates the protective effectiveness of a PVD nanocomposite coating (Alwin XC), consisting of a nanocrystalline chromium aluminum silicon nitride (CrAlSiN) base layer combined with a TiC/C low-friction layer) deposited on Orvar 2M hot-work tool steel under sliding friction conditions at ambient temperature. Tribo-logical tests were carried out using the ball-on-disc method under technically dry friction, with a silicon nitride (Si₃N₄) ceramic ball serving as the counterbody. The tribological behavior of the coated system was directly com - pared with that of uncoated Orvar 2M steel, with particular emphasis on the quantitative analysis of wear-track geometry. The obtained results were additionally referenced against preliminary tribological data acquired at elevated temperatures, suggesting the possible contribution of tribo-oxidative processes to coating performance. The results demonstrate a pronounced improvement in wear resistance resulting from the application of the Alwin XC coating. For uncoated Orvar 2M steel, the maximum wear-track depth ranged from 14 to 20 µm, with wear areas of approximately 8000–12,000 µm². In contrast, for the Orvar 2M + Alwin XC system, the wear-track depth did not exceed 2–7 µm, while the wear area was limited to 1400–3000 µm². These differences indicate a significant reduction in wear intensity and a fundamental modification of the sliding contact conditions in the presence of the coating. Microscopic analyses confirmed that uncoated steel undergoes intensive abrasive wear accompanied by plastic deformation of the near-surface layer, whereas the Alwin XC coating stabilizes the tribological contact, leading to the formation of shallow and narrow wear tracks. The scientific novelty of this work lies in quantita - tively demonstrating that the Alwin XC coating not only reduces wear but also substantially alters the contact geometry by limiting the real contact area, acting as an effective load-bearing layer under ambient-temperature conditions, and suggesting potential tribo-oxidative mechanisms at elevated temperatures
Zitieren
APA
Hawryluk, M. R., Leśniewski, T., & Wiergowski, M. (2026). Protective effectiveness of a nanocomposite coating with low-friction layers under sliding friction at ambient temperature. Advances in Science and Technology Research Journal, 20(7), 43-53. https://doi.org/10.12913/22998624/218448
Vancouver
Hawryluk MR, Leśniewski T, Wiergowski M. Protective effectiveness of a nanocomposite coating with low-friction layers under sliding friction at ambient temperature. Advances in Science and Technology Research Journal. 2026;20(7):43-53. doi:10.12913/22998624/218448
BibTeX
@article{Hawryluk2026,
author = {Hawryluk, Marek Robert and Leśniewski, Tadeusz and Wiergowski, Marek},
title = {Protective effectiveness of a nanocomposite coating with low-friction layers under sliding friction at ambient temperature},
journal = {Advances in Science and Technology Research Journal},
year = {2026},
volume = {20},
number = {7},
pages = {43--53},
doi = {10.12913/22998624/218448}
}
EUVIMED