EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Design and Optimization of Casting System for Integrated Longitudinal Beam and Tower Package Based on Al-Si Alloy

Li Heng, Wang Nan, Teng Xingyu, Chai Zhen, Zhu Xiaoyong, Wu Yucheng

Advances in Science and Technology Research Journal · 01.06.2024 · 18 (3) · 111-122

DOI: 10.12913/22998624/186012 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advances in Science and Technology Research Journal, online erschienen am 01.06.2024. Verfasst von Li Heng und 5 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study optimized the integrated die-casting of an aluminum alloy longitudinal beam and tower component using no heat-treated aluminum alloy. Leveraging material properties and part geometry, a pouring system was designed and refined through mold flow analysis. This optimized the velocity, temperature distribution, and air entrapment to reduce defects like shrinkage porosity. The optimized pouring parameters were 695 °C melt temperature, 210 °C initial mold temperature, and 4.9 m/s shot speed. This reduced shrinkage porosity by 10.4% versus the original de-sign. Die-casting trials with the optimized pouring system produced defect-free castings. The critical load-bearing section of the die casting had a yield strength of 184 MPa and elongation of 10.9%, which can meet the production requirements. In summary, based on the optimization of pouring system by mold flow analysis, by developing the integrated die casting process for aluminum alloy, not only are the defects eliminated, but also the castings with sufficient mechanical properties are produced.

Zitieren

APA

Heng, L., Nan, W., Xingyu, T., Zhen, C., Xiaoyong, Z., & Yucheng, W. (2024). Design and Optimization of Casting System for Integrated Longitudinal Beam and Tower Package Based on Al-Si Alloy. Advances in Science and Technology Research Journal, 18(3), 111-122. https://doi.org/10.12913/22998624/186012

Vancouver

Heng L, Nan W, Xingyu T, Zhen C, Xiaoyong Z, Yucheng W. Design and Optimization of Casting System for Integrated Longitudinal Beam and Tower Package Based on Al-Si Alloy. Advances in Science and Technology Research Journal. 2024;18(3):111-122. doi:10.12913/22998624/186012

BibTeX
@article{Heng2024,
  author = {Heng, Li and Nan, Wang and Xingyu, Teng and Zhen, Chai and Xiaoyong, Zhu and Yucheng, Wu},
  title = {Design and Optimization of Casting System for Integrated Longitudinal Beam and Tower Package Based on Al-Si Alloy},
  journal = {Advances in Science and Technology Research Journal},
  year = {2024},
  volume = {18},
  number = {3},
  pages = {111--122},
  doi = {10.12913/22998624/186012}
}
Kostenlos starten →