EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Predictive modeling of density-controlled mechanical strength in biomass briquettes produced from candlenut shell and tamarind peel

Jemmy Jonson Sula Dethan, Fredrik Julius Haba Bunga, Lesybeth Marlina Nubatonis, Godlief Fredrik Neonufa, Jonathan Ebet Koehuan, Novi Ivonne Bullu

Ecological Engineering & Environmental Technology · 01.04.2026 · 27 (4) · 191-199

DOI: 10.12912/27197050/218788 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Ecological Engineering & Environmental Technology, online erschienen am 01.04.2026. Verfasst von Jemmy Jonson Sula Dethan und 5 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The utilization of agricultural waste for biomass briquette production offers a sustainable approach to renewable energy development. This study investigated the effect of mixture ratio between candlenut shell charcoal ( Aleurites moluccanus ) and tamarind peel ( Tamarindus indica L.) on the physical and mechanical properties of biomass bri - quettes, with particular emphasis on density and compressive strength. Briquettes were produced using five mix - ture ratios (1:3, 1:2, 1:1, 2:1, and 3:1, w/w) and evaluated for moisture content, density, and compressive strength. The results showed that moisture content remained low and relatively constant across all treatments (≈6%), while density and compressive strength exhibited significant dependence on mixture ratio. Density displayed a non-linear trend with a clear maximum near the 1:1 ratio, whereas compressive strength increased linearly with density. Based on these relationships, a semi-empirical predictive model was developed by coupling a quadratic den - sity–ratio model with a linear density–strength model. The integrated model successfully captured the observed experimental trends and identified an optimal mixture region consistent with the highest mechanical performance. The proposed model provides a simple and physically meaningful framework for predicting briquette strength from mixture composition, enabling preliminary formulation optimization with reduced experimental effort. This approach supports efficient utilization of agricultural residues for sustainable solid biofuel production.

Zitieren

APA

Dethan, J. J. S., Bunga, F. J. H., Nubatonis, L. M., Neonufa, G. F., Koehuan, J. E., & Bullu, N. I. (2026). Predictive modeling of density-controlled mechanical strength in biomass briquettes produced from candlenut shell and tamarind peel. Ecological Engineering & Environmental Technology, 27(4), 191-199. https://doi.org/10.12912/27197050/218788

Vancouver

Dethan JJS, Bunga FJH, Nubatonis LM, Neonufa GF, Koehuan JE, Bullu NI. Predictive modeling of density-controlled mechanical strength in biomass briquettes produced from candlenut shell and tamarind peel. Ecological Engineering & Environmental Technology. 2026;27(4):191-199. doi:10.12912/27197050/218788

BibTeX
@article{Dethan2026,
  author = {Dethan, Jemmy Jonson Sula and Bunga, Fredrik Julius Haba and Nubatonis, Lesybeth Marlina and Neonufa, Godlief Fredrik and Koehuan, Jonathan Ebet and Bullu, Novi Ivonne},
  title = {Predictive modeling of density-controlled mechanical strength in biomass briquettes produced from candlenut shell and tamarind peel},
  journal = {Ecological Engineering & Environmental Technology},
  year = {2026},
  volume = {27},
  number = {4},
  pages = {191--199},
  doi = {10.12912/27197050/218788}
}
Kostenlos starten →