EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Sustainable production of graphene oxide derived from sugarcane bagasse for dispersive solid phase extraction

Rinawati Rinawati, Dian Rifani Muthia, Geby Tiorya Angelina Manurung, Aranca Putri Maharani Susanto, Elsa Fitrianingsih, Suharso Suharso, Agung Abadi Kiswandono, Fahamsyah Hamdan Latief, Widiarti Widiarti

Journal of Ecological Engineering · 01.07.2026 · 27 (7) · 256-272

DOI: 10.12911/22998993/218786 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Ecological Engineering, online erschienen am 01.07.2026. Verfasst von Rinawati Rinawati und 8 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The ubiquitous prevalence of ciprofloxacin (CIP) in aquatic environments has prompted concerns about its dura - bility, ecological effect, and contribution to antimicrobial resistance. To address this difficulty, analytical extraction procedures must be both sensitive and environmentally friendly. This paper describes a green dispersive solid-phase extraction (DSPE) method for CIP determination that uses graphene oxide (GO) derived from sugarcane bagasse as a renewable biomass precursor. GO was synthesized in a single step using a low-temperature thermal technique and then characterized using FTIR, SEM-EDX, and XRD, showing the successful production of oxygen-rich and structurally disordered GO suited for adsorption applications. The DSPE parameters were systematically tuned using response surface methodology (RSM) with a Box-Behnken design (BBD) to investigate the effects of pH, GO mass, and contact time on CIP adsorption efficiency. The quadratic model well represented adsorption behavior, with a high coefficient of determination (R² = 0.9726) and great prediction dependability. GO mass was found to be the most influential factor, with pH and contact duration serving as secondary parameters that fine-tuned the adsorp - tion process. Under optimal conditions (pH 3.16, GO mass 43.00 mg, contact time 29.94 min), the model projected a 90.46% CIP adsorption efficiency. The experimental validation resulted in an average adsorption of 88.39%, with a small prediction error of 2.34%, demonstrating excellent agreement between anticipated and experimental results. These findings show that sugarcane bagasse-derived GO is a very effective and sustainable adsorbent for DSPE-based CIP analysis, providing a dependable platform for monitoring trace antibiotics in aquatic systems.

Zitieren

APA

Rinawati, R., Muthia, D. R., Manurung, G. T. A., Susanto, A. P. M., Fitrianingsih, E., Suharso, S., Kiswandono, A. A., Latief, F. H., & Widiarti, W. (2026). Sustainable production of graphene oxide derived from sugarcane bagasse for dispersive solid phase extraction. Journal of Ecological Engineering, 27(7), 256-272. https://doi.org/10.12911/22998993/218786

Vancouver

Rinawati R, Muthia DR, Manurung GTA, Susanto APM, Fitrianingsih E, Suharso S, et al. Sustainable production of graphene oxide derived from sugarcane bagasse for dispersive solid phase extraction. Journal of Ecological Engineering. 2026;27(7):256-272. doi:10.12911/22998993/218786

BibTeX
@article{Rinawati2026,
  author = {Rinawati, Rinawati and Muthia, Dian Rifani and Manurung, Geby Tiorya Angelina and Susanto, Aranca Putri Maharani and Fitrianingsih, Elsa and Suharso, Suharso and Kiswandono, Agung Abadi and Latief, Fahamsyah Hamdan and Widiarti, Widiarti},
  title = {Sustainable production of graphene oxide derived from sugarcane bagasse for dispersive solid phase extraction},
  journal = {Journal of Ecological Engineering},
  year = {2026},
  volume = {27},
  number = {7},
  pages = {256--272},
  doi = {10.12911/22998993/218786}
}
Kostenlos starten →