EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Lean Six Sigma Approach to Improve the Production Process in the Mould Industry: a Case Study

António M.H. Pereira, Miguel R. Silva, Mercedes A.G. Domingues, José C. Sá

Quality Innovation Prosperity · 30.11.2019 · 23 (3) · 103-121

DOI: 10.12776/qip.v23i3.1334 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Quality Innovation Prosperity, online erschienen am 30.11.2019. Verfasst von António M.H. Pereira und 3 weiteren Autor:innen. Die Arbeit wurde bisher 35-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Purpose

The purpose of this article is to explore the optimization of internal process is assumed as a critical factor to be capable of answering to the moulds industries. Consequently, it has been considered essential to adopt high-valued methodologies to support tooling industry in order to achieve global competitive advantages. For that purpose, this work aims to apply LEAN principles and techniques to support mould design and manufacturing processes.Methodology/Approach: The methodology used was based on PDCA/DMAIC, with the following stages: Define, Measure, Analyze, Improve and Control. For each stages was taken some of Lean Six Sigma techniques, such as Continuous Improvement, Value Stream Mapping, Pareto analysis and Overall Equipment Effectiveness.

Findings

This study results was revealed that there are many areas on the organizations in the Mould Industry, when they utilize otimizations tools obtain hugt successes. With the Pareto analysis was carried out to show that events that contributes the most to the stops. The results were: unavailability of the operator (16.4%), programming the machine (14.4%) and tool exchange (12.4%) In the case of this Mould Industry study was obtained for the CNC machines studies, with the implementation of Lean Six Sigma tools as obtained a improvement about 20% of global OEE.Research Limitation/implication: This research was revealed that there the moulds are Project unique and difficult to analyze. Moreover, this paper reports that the approach LEAN Six Sigma is very interesting for the continuous improvement of processes and profitability of moulds industry.Originality/Value of paper: This research highlight areas of future research using of quality management methods and Lean Six Sigma tools to analyse and optimize production in the moulds industry. Therefore this research It is considered to promote and adopt high-valued methodologies to support tooling industry in order to achieve global competitive advantages.

Zitieren

APA

Pereira, A. M., Silva, M. R., Domingues, M. A., & Sá, J. C. (2019). Lean Six Sigma Approach to Improve the Production Process in the Mould Industry: a Case Study. Quality Innovation Prosperity, 23(3), 103-121. https://doi.org/10.12776/qip.v23i3.1334

Vancouver

Pereira AM, Silva MR, Domingues MA, Sá JC. Lean Six Sigma Approach to Improve the Production Process in the Mould Industry: a Case Study. Quality Innovation Prosperity. 2019;23(3):103-121. doi:10.12776/qip.v23i3.1334

BibTeX
@article{Pereira2019,
  author = {Pereira, António M.H. and Silva, Miguel R. and Domingues, Mercedes A.G. and Sá, José C.},
  title = {Lean Six Sigma Approach to Improve the Production Process in the Mould Industry: a Case Study},
  journal = {Quality Innovation Prosperity},
  year = {2019},
  volume = {23},
  number = {3},
  pages = {103--121},
  doi = {10.12776/qip.v23i3.1334}
}
Kostenlos starten →