ASPECTS OF VERIFICATION AND OPTIMIZATION OF SHEET METAL NUMERICAL SIMULATIONS PROCESS USING THE PHOTOGRAMMETRIC SYSTEM
Acta Metallurgica Slovaca · 2013
DOI: 10.12776/ams.v19i1.86 ↗Kurz gefasst
Fachartikel in der Zeitschrift Acta Metallurgica Slovaca, 2013. Verfasst von Wiesław Frącz und 2 weiteren Autor:innen. Die Arbeit wurde bisher 11-mal zitiert (Crossref).
Abstract (Originalsprache)
The paper presents the use of photogrammetric system for verification and optimization of thenumerical simulation of sheet metal forming process. The use of GOM Argus photogrammetricsystem allowed determining the real values of the analyzed drawpiece strains, construction ofreal Forming Limit Curve (FLC) and comparing them with the limit strain values resulting fromthe FLC. The knowledge of the drawpiece real strain distribution in the sheet metal formingoptimization process allows, by using the numerical simulation in the eta/Dynaform commercialsoftware, to estimate the optimum value of the friction coefficient that was taken into account inthe numerical simulation. The GOM Argus system was also used to assess the impact of selectedtechnological parameters on the accuracy of sheet metal forming drawpiece shape in comparisonwith the theoretical CAD model. An attempt to optimize the process to obtain the correctgeometry of the drawpiece has been also carried out.
Zitieren
APA
Frącz, W., Stachowicz, F., & Pieja, T. (2013). ASPECTS OF VERIFICATION AND OPTIMIZATION OF SHEET METAL NUMERICAL SIMULATIONS PROCESS USING THE PHOTOGRAMMETRIC SYSTEM. Acta Metallurgica Slovaca. https://doi.org/10.12776/ams.v19i1.86
Vancouver
Frącz W, Stachowicz F, Pieja T. ASPECTS OF VERIFICATION AND OPTIMIZATION OF SHEET METAL NUMERICAL SIMULATIONS PROCESS USING THE PHOTOGRAMMETRIC SYSTEM. Acta Metallurgica Slovaca. 2013. doi:10.12776/ams.v19i1.86
BibTeX
@article{Frcz2013,
author = {Frącz, Wiesław and Stachowicz, Feliks and Pieja, Tomasz},
title = {ASPECTS OF VERIFICATION AND OPTIMIZATION OF SHEET METAL NUMERICAL SIMULATIONS PROCESS USING THE PHOTOGRAMMETRIC SYSTEM},
journal = {Acta Metallurgica Slovaca},
year = {2013},
doi = {10.12776/ams.v19i1.86}
}
EUVIMED