EUVIMEDEUVIMED entdecken
Crossref

แบบจำลองการถายเทมวลสารและการเปลยนแปลงทางกลของเมลดขาวในระหวางการอบแหงแบบฟลอไดซเบด

ปรีดา ปรากฎมาก

Engineering and Technology Horizons · 01.01.2014

DOI: 10.12755/tsme.res.2014.154 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Engineering and Technology Horizons, erschienen am 01.01.2014. Verfasst von ปรีดา ปรากฎมาก.

AbstractSchlagwörterBibliografische AngabenZitieren

Abstract (Originalsprache)

The research studied the effect of the fluidized bed drying technique on drying kinetics and fissure of rice kernel (Suphan Buri 1) using hot air at drying temperature range of 85-130oC. The three-dimensional mathematical model was developed to simulate the evolutions of the moisture content, temperature and stresses within rice kernel during drying. The simulated moisture content and temperature of rice gain were favorably in agreement with experimental results. The simulation results showed that the maximum moisture and temperature gradients within rice kernel occurred at the drying times of 35 and 6 s, respectively. The moisture and temperature gradients were found to decrease with increase in drying time. The magnitude of moisture gradient was remarkably higher than the temperature gradient and thus the moisture gradient was a main cause of fissures in rice grains. The maximum stress was found near the middle region of kernel and had the value of stresses about 118 MPa.

Schlagwörter

rice grainmass transfermechanical damagefluidized bed dryingdrying modeling

Zitieren

APA

ปรากฎมาก, ป. (2014). แบบจำลองการถายเทมวลสารและการเปลยนแปลงทางกลของเมลดขาวในระหวางการอบแหงแบบฟลอไดซเบด. Engineering and Technology Horizons. https://doi.org/10.12755/tsme.res.2014.154

Vancouver

ปรากฎมาก ป. แบบจำลองการถายเทมวลสารและการเปลยนแปลงทางกลของเมลดขาวในระหวางการอบแหงแบบฟลอไดซเบด. Engineering and Technology Horizons. 2014. doi:10.12755/tsme.res.2014.154

BibTeX
@article{2014,
  author = {ปรากฎมาก, ปรีดา},
  title = {แบบจำลองการถายเทมวลสารและการเปลยนแปลงทางกลของเมลดขาวในระหวางการอบแหงแบบฟลอไดซเบด},
  journal = {Engineering and Technology Horizons},
  year = {2014},
  doi = {10.12755/tsme.res.2014.154}
}
Kostenlos starten →