EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Analysis of the melting process of carbon-bearing pellets in iron bath, slag bath and graphite crucible

Chao Yang, Xue-feng She, Ru-yi Wang, Pei-fang Lin, Jing-song Wang, Qing-guo Xue

Materials Open Research · 2024

DOI: 10.12688/materialsopenres.17650.1 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials Open Research, 2024. Verfasst von Chao Yang und 5 weiteren Autor:innen. Die Arbeit nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the National Key R&D Program of China, Integration and equipment of key technologies for solid and dangerous waste disposal in collaboration with steel and gold treatment furnace and kiln.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Background

With the increase in the amount of scrap steel in society, the proportion of electric furnace steelmaking is increasing year by year, especially in China. Due to the high Zn content, the electric furnace arc dust (EAFD) needs to be recovered by non-blast furnace process. Due to EAFD containing a large amount of zinc ferrite, it needs to be recovered by fire process. It is a promising process to melt the EAFD pellets to get the discount and zinc-rich secondary ash.

Methods

To clarify the melting behavior of pellets in the metallurgical process, the slag phase diagram and the effect of temperature and FeO on slag viscosity were calculated using FactSage, and the melting process of electric furnace arc dust (EAFD) pellets in a graphite crucible, iron bath, and slag bath were experimentally investigated.

Results

The experimental results show that the viscosity of the slag system decreases with increasing temperature and FeO content, and the effect of FeO on viscosity is greater. The viscosity decreased from 0.305 to 0.276 Pa·s when the FeO content in the slag was increased from 0 wt. % to 2 wt.% at 1773 K. The melting process of the EAFD pellets in an iron bath and graphite crucible was consistent, and after the formation of liquid-phase slag in the pellets, the liquid-phase slag was diffused to melt the pellets.

Conclusions

The iron bath improved the heat transfer conditions of the pellets, reducing the smelting time from 600 to 360 s. The slag bath promoted the slagging reaction of the contact part to change the pellet melting process and increase the pellet melting speed, and the EAFD pellets melted within 240 s in a slag bath.

Förderung

  • the National Key R&D Program of China
  • Integration and equipment of key technologies for solid and dangerous waste disposal in collaboration with steel and gold treatment furnace and kiln

Zitieren

APA

Yang, C., She, X., Wang, R., Lin, P., Wang, J., & Xue, Q. (2024). Analysis of the melting process of carbon-bearing pellets in iron bath, slag bath and graphite crucible. Materials Open Research. https://doi.org/10.12688/materialsopenres.17650.1

Vancouver

Yang C, She X, Wang R, Lin P, Wang J, Xue Q. Analysis of the melting process of carbon-bearing pellets in iron bath, slag bath and graphite crucible. Materials Open Research. 2024. doi:10.12688/materialsopenres.17650.1

BibTeX
@article{Yang2024,
  author = {Yang, Chao and She, Xue-feng and Wang, Ru-yi and Lin, Pei-fang and Wang, Jing-song and Xue, Qing-guo},
  title = {Analysis of the melting process of carbon-bearing pellets in iron bath, slag bath and graphite crucible},
  journal = {Materials Open Research},
  year = {2024},
  doi = {10.12688/materialsopenres.17650.1}
}
Kostenlos starten →