EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

An enhanced broadband class-J mode power amplifier for 5G smart meter applications

Nagisetty Sridhar iD, Dr Chinnaiyan Senthilpari iD, Dr Mardeni R iD, Dr Wong Hin Yong

F1000Research · 2024

DOI: 10.12688/f1000research.73498.2 ↗

Kurz gefasst

Fachartikel in der Zeitschrift F1000Research, 2024. Verfasst von Nagisetty Sridhar und 3 weiteren Autor:innen. Beteiligte Einrichtung: FACULTY OF ENGINEERING, MULTIMEDIA UNIVERSITY, CYBERJAYA, SELANGOR, 63100, Malaysia. Hauptthemen laut MEDLINE: Wireless Technology. Die Arbeit nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Higher Education, Malaysia.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Background

With the tremendous increase in the usage of smart meters for industrial/ household purposes, their implementation is considered a crucial challenge in the Internet of Things (IoT) world, leading to a demand for emerging 5G technology. In addition, a large amount of data has to be communicated by smart meters efficiently, which needs a significant enhancement in bandwidth. The power amplifier (PA) plays a major role in deciding the efficiency and bandwidth of the entire communication system. Among the various modes of PAs, a newly developed Class-J mode PA has been proven to achieve high efficiency over a wide bandwidth by maintaining linearity.

Methods

This paper proposes a Class-J mode PA design methodology using a CGH40010F-GaN device that operates at a 3.5 GHz frequency to meet the requirements of 5G wireless communication technology for the replacement of existing 4G/LTE technology used for advanced metering infrastructure (AMI) in smart grids. This research's main objective is to design the proper matching networks (M.Ns) to achieve Class-J mode operation that satisfies the bandwidth requirements of 5G smart grid applications. With the target impedances obtained using the load-pull simulation, lumped element matching networks are analyzed and designed in 3 ways using the ADS EDA tool.

Results

The simulation results reveal that the proposed Class-J PA provides a maximum drain efficiency (D.E) of 82%, power added efficiency (PAE) of 67% with 13 dB small-signal gain at 3.5 GHz, and output power of 40 dBm (41.4 dBm peak) with a power gain of approximately 7 dB over a bandwidth of approximately 400 MHz with a 28 V power supply into a 50 Ω load.

Conclusion

The efficiency and bandwidth of the proposed Class-J PA can be enhanced further by fine-tuning the matching network design to make it more suitable for 5G smart meter/grid applications.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Wireless TechnologyAmplifiers, ElectronicElectric Power SuppliesEquipment DesignInternet of ThingsComputer Communication Networks

Stichwörter der Autor:innen

3.5 GHz5GClass-Jgood efficiencymatching networkspower amplifierwide bandwidth

Autor:innen und Institutionen

  • FACULTY OF ENGINEERING, MULTIMEDIA UNIVERSITY, CYBERJAYA, SELANGOR, 63100, Malaysia.

ORCID-Profile: Nagisetty Sridhar, Dr Chinnaiyan Senthilpari, Dr Mardeni R

Förderung

  • Ministry of Higher Education, Malaysia

Zitieren

APA

Sridhar, N., Senthilpari, D. C., R, D. M., & Hin Yong, D. W. (2024). An enhanced broadband class-J mode power amplifier for 5G smart meter applications. F1000Research. https://doi.org/10.12688/f1000research.73498.2

Vancouver

Sridhar N, Senthilpari DC, R DM, Hin Yong DW. An enhanced broadband class-J mode power amplifier for 5G smart meter applications. F1000Research. 2024. doi:10.12688/f1000research.73498.2

BibTeX
@article{Sridhar2024,
  author = {Sridhar, Nagisetty and Senthilpari, Dr Chinnaiyan and R, Dr Mardeni and Hin Yong, Dr Wong},
  title = {An enhanced broadband class-J mode power amplifier for 5G smart meter applications},
  journal = {F1000Research},
  year = {2024},
  doi = {10.12688/f1000research.73498.2}
}
Kostenlos starten →