Enhancement of Tribological and Mechanical Properties via Soda-Lime Silica Glass Reinforced Al-Mg-Zn Matrix Composite
F1000Research · 20.08.2026 · 15 · 1181
DOI: 10.12688/f1000research.183177.2 ↗Kurz gefasst
Fachartikel in der Zeitschrift F1000Research, online erschienen am 20.08.2026. Verfasst von Babuli Chandra Kar und 2 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering, Kalinga Institute of Industrial Technology (KIIT) Deemed to be University, Bhubaneswar, Odisha, 751024, India. Hauptthemen laut MEDLINE: Glass, Silicon Dioxide, Aluminum, Zinc. Die Arbeit nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Background
A large volume of waste Soda-Lime Silica (SLS) glass has become a major environmental concern due to improper disposal and limited recycling utilization. At the same time, the increasing industrial demand for high-strength-to-weight ratio materials has opened opportunities for incorporating SLS glass as reinforcement in aluminium matrix composites.
Methods
In this study, a novel aluminium, magnesium, zinc and SLS glass hybrid metal matrix composite (MMC) was developed, using an ultrasonic vibration-supported stir-squeeze casting process. Glass reinforcements of 1, 2, 4, and 5 wt.% were incorporated to investigate their influence on the microstructural, mechanical, and tribological properties of the composite. The Scanning Electron Microscopy (SEM), Strain Rate Jump (SRJ) Gleeble compression test, micro-hardness, impact, pin-on-disc dry sliding wear test, wear morphology were conducted for comprehensive characterization of the cast specimen.
Results
SEM pictures revealed the uniform dispersion and strong matrix-reinforcement bonding. The hardness of the fabricated composite increased by ̴ 23% as the reinforcement content increased from 1 to 5 wt.%, whereas the toughness reduced by ̴ 46%. The SRJ test conducted using a Gleeble thermo-mechanical simulator clearly illustrates lower compressive strength for the composites reinforced with 4 wt.% and 5 wt.% SLS glass, whereas the sample having 2 wt.% reinforcement exhibited the highest strain-rate sensitivity. The 2 wt.% composite exhibited the lowest wear during the pin-on-disc dry sliding wear test, which can be attributed to the synergistic effects of Zn and Mg, along with the strengthening imparted by the well-dispersed glass particles. At higher reinforcement percentages, micro-fracturing and wear damage became more pronounced.
Conclusions
Overall, the composite reinforced with 2 wt.% SLS glass offered the best balance of strength, toughness, and wear resistance. By valorising waste SLS glasses, these hybrid composites can be utilized for lightweight, structural and wear-critical applications, thereby advancing sustainable manufacturing.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- School of Mechanical Engineering, Kalinga Institute of Industrial Technology (KIIT) Deemed to be University, Bhubaneswar, Odisha, 751024, India.
ORCID-Profile: Sambit Kumar Mohapatra, Pushkar Jha
Zitieren
APA
Chandra Kar, B., Kumar Mohapatra, S., & Jha, P. (2026). Enhancement of Tribological and Mechanical Properties via Soda-Lime Silica Glass Reinforced Al-Mg-Zn Matrix Composite. F1000Research, 15, 1181. https://doi.org/10.12688/f1000research.183177.2
Vancouver
Chandra Kar B, Kumar Mohapatra S, Jha P. Enhancement of Tribological and Mechanical Properties via Soda-Lime Silica Glass Reinforced Al-Mg-Zn Matrix Composite. F1000Research. 2026;15:1181. doi:10.12688/f1000research.183177.2
BibTeX
@article{ChandraKar2026,
author = {Chandra Kar, Babuli and Kumar Mohapatra, Sambit and Jha, Pushkar},
title = {Enhancement of Tribological and Mechanical Properties via Soda-Lime Silica Glass Reinforced Al-Mg-Zn Matrix Composite},
journal = {F1000Research},
year = {2026},
volume = {15},
pages = {1181},
doi = {10.12688/f1000research.183177.2}
}
EUVIMED