Development of an Affordable Silicone Phantom of The Kidney with 3D Printed Mould for Ultrasound Guided Percutaneous Nephrolithotomy Training in Indonesia
F1000Research · 2025
DOI: 10.12688/f1000research.156046.2 ↗Kurz gefasst
Fachartikel in der Zeitschrift F1000Research, 2025. Verfasst von Rananda Anggakara Hendarmo und 8 weiteren Autor:innen. Beteiligte Einrichtung: Department of Urology, Universitas Indonesia - Cipto Mangunkusumo National General Hospital, Jakarta, DKI Jakarta, 10430, Indonesia. Hauptthemen laut MEDLINE: Nephrolithotomy, Percutaneous, Printing, Three-Dimensional, Phantoms, Imaging, Kidney. Die Arbeit nennt 13 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Universitas Indonesia.
Abstract (Originalsprache)
Objective
To develop an affordable kidney phantom for ultrasound guided percutaneous nephrolithotomy training model.
Methods
Twenty one kidney models were manufactured and implemented as ultrasound guided percutaneous nephrolithotomy (PCNL) training models for urologists without any prior experience of independently performing PCNL in Indonesia. The unit cost of an alternative model was less than 30 USD (IDR 450,000). Twenty one junior with no prior experience of performing ultrasound guided PCNL participated in the research. The evaluation was done through anonymous responses to a questionnaire using the Likert scale.
Result
The affordable PCNL model showed highly positive results among all participants (realistic anatomy 7.86/10, realistic visualization of calyx 8.19/10, realistic puncture 7.43/10, guidewire placement 8.19/10, realistic nephrostomy 7.57/10, stone visualization 7.76/10, feedback 7.52/10, post-training discussion 8.57/10). All of the participants recommended the affordable PCNL model phantom for ultrasound guided PCNL training in Indonesia.
Conclusion
An affordable model utilizing 3D printed mould, silicone, and gelatine jelly is a feasible option for ultrasound guided PCNL training among urologists in developing countries. The utilization of 3D printing and silicone moulding will be beneficial in reducing the cost of surgery model while preserving the realistic tactile feedback.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Department of Urology, Universitas Indonesia - Cipto Mangunkusumo National General Hospital, Jakarta, DKI Jakarta, 10430, Indonesia.
- Department of Urology, Muljibhai Patel Urological Hospital, Nadiad, Gujarat, India.
ORCID-Profile: Rananda Anggakara Hendarmo, Ponco Birowo, Nur Rasyid, Kevin Yonathan
Förderung
- Universitas Indonesia
Zitieren
APA
Hendarmo, R. A., Birowo, P., Rasyid, N., Wahyudi, I., Situmorang, G. R., Atmoko, W., Desai, M. R., Yonathan, K., & Swannjo, J. P. (2025). Development of an Affordable Silicone Phantom of The Kidney with 3D Printed Mould for Ultrasound Guided Percutaneous Nephrolithotomy Training in Indonesia. F1000Research. https://doi.org/10.12688/f1000research.156046.2
Vancouver
Hendarmo RA, Birowo P, Rasyid N, Wahyudi I, Situmorang GR, Atmoko W, et al. Development of an Affordable Silicone Phantom of The Kidney with 3D Printed Mould for Ultrasound Guided Percutaneous Nephrolithotomy Training in Indonesia. F1000Research. 2025. doi:10.12688/f1000research.156046.2
BibTeX
@article{Hendarmo2025,
author = {Hendarmo, Rananda Anggakara and Birowo, Ponco and Rasyid, Nur and Wahyudi, Irfan and Situmorang, Gerhard Reinaldi and Atmoko, Widi and Desai, Mahesh Ramanlal and Yonathan, Kevin and Swannjo, Jonathan Pratama},
title = {Development of an Affordable Silicone Phantom of The Kidney with 3D Printed Mould for Ultrasound Guided Percutaneous Nephrolithotomy Training in Indonesia},
journal = {F1000Research},
year = {2025},
doi = {10.12688/f1000research.156046.2}
}
EUVIMED